View source for Resistors and Conductivity

A resistor is a component of a circuit that acts to reduce both the flow of current and the voltage levels within the circuit. When current runs through a resistor, the energy stored within particles is converted to another form of energy, typically indicated by the emission of light or heat. Conductivity is a property of a given material that refers to the material's ability to transmit electricity. Conductivity and resistivity are opposites; that is, the higher the conductivity of a material, the less resistance it offers to the flow of current. 

==Relevant Equations==

The resistance of a material can be calculated in several ways. The most common method relates resistance to the potential difference and the conventional current of the circuit, using the equation <math>R = {\frac{ΔV}{I}}</math> where ΔV is the potential difference across the resistor and I is the conventional current running through the circuit.


The conductivity of a material can be found using the equation <math>&sigma; = |q|nu = {\frac{\vec{J}}{\vec{E}}}</math> where |''q''| is the absolute value of the charge on each carrier, ''n'' is the number of charge carriers per m<sup>3</sup>, and ''u'' is the mobility of the charge carriers, '''J''' is the current density (I/A) in A/m<sup>2</sup>, and '''E''' is the electric field due to charges outside the material.


Another equation used to quantify resistance relates it to certain properties of the material and geometric properties of the resistor itself: <math>R = {\frac{L}{&sigma;A}}</math> where L is the length of the resistor, &sigma; is the conductivity of the material, and A is the cross-sectional area of the resistor. This equation clearly demonstrates that resistivity and conductivity are inverses, as the conductivity constant can be found in the denominator.

===A Computational Model===

How do we visualize or predict using this topic. Consider embedding some vpython code here [https://trinket.io/glowscript/31d0f9ad9e Teach hands-on with GlowScript]

==Ohmic vs. Non-Ohmic Resistors==

Based on the equations above, it is clear that both conductivity and resistance are dependent on the mobility of the charge carriers, and so these values may vary as the current through an object changes. When the conductivity of a material is nearly constant, independent of the amount of current flowing through the resistor, we consider the material and resistor "ohmic." No matter is truly ohmic, as conductivity depends to some extent on temperature, and higher currents often lead to higher temperatures. Materials are generally considered ohmic, however, if the temperature change is minimal.

==Symbol and Units==

The conventional symbol for a resistor used in electrical circuit diagrams is shown below.

[[File:Resistor_Symbol.png|150px]]

The unit of resistance is the ohm (&Omega;), and the unit for conductivity is the Siemen per meter (S/m).

==Resistors in Series==

When ohmic resistors are connected along a single path with no branches, as in the figure below, they are said to be in series.

[[File:Resistors_in_Series.png|300px|center]]

Resistors in series are, in practice, equivalent to a single resistor with the combined resistance of its constituent resistors. In other words, <math>R_{equivalent} = R_1 + R_2 + R_3 + ... + R_n</math> for ''n'' resistors in series. 

Because R = L/(&sigma;A), if every resistor is composed of the same material and has the same cross-sectional area, <math>L_{equivalent} = L_1 + L_2 + L_3 + ... + L_n</math> for ''n'' resistors in series.

==Resistors in Parallel==

When ohmic resistors are not connected in series, they can be connected in parallel (as in the figure below), creating several branches within a circuit. 

[[File:Resistors_in_Parallel.png|300px|center]]

Several resistors in parallel are, in practice, equivalent to a single resistor with a resistance that is the reciprocal of the sum of reciprocals of the individual resistances. In other words, <math>{\frac{1}{R_{equivalent}}} = {\frac{1}{R_1}} + {\frac{1}{R_2}} + {\frac{1}{R_3}} + ... + {\frac{1}{R_n}}</math> for ''n'' resistors in parallel.

Because 1/R = (&sigma;A)/L, if every resistor is composed of the same material and has the same length, <math>A_{equivalent} = A_1 + A_2 + A_3 + ... + A_n</math> for ''n'' resistors in parallel.

==Examples==

===In Series===

[[File:Resistors_in_Series_Example.gif|350px|left]] Because the circuit at left has no branches, the resistors can be considered in series. As such, the values of the resistance of the individual resistors can be summed to find the equivalent resistance. Thus, 
<math>R_{equivalent} = R_1 + R_2 + R_3 + R_4</math>
<math>R_{equivalent} = 65 \ &Omega; + 84 \ &Omega; + 73 \ &Omega; + 10 \ &Omega;</math>
<math>R_{equivalent} = 232 \ &Omega;</math>

Using this equivalent resistance and the given voltage (25 V), it is possible to find the value of the current running through the circuit after passing through the resistors.
<math>I = {\frac{&Delta;V}{R_{equivalent}}} = {\frac{25 \ V}{232 \ &Omega;}} \approx 0.108 \ A</math>

===In Parallel===

[[File:Resistors_in_Parallel_Example.gif|350 px|right]] Because the circuit at right has several possible paths of current, the resistors can be considered in parallel. 
As a result, <math>{\frac{1}{R_{equivalent}}} = {\frac{1}{R_1}} + {\frac{1}{R_2}} + {\frac{1}{R_3}} + {\frac{1}{R_4}}</math>
<math>{\frac{1}{R_{equivalent}}} = {\frac{1}{10 \ &Omega;}} + {\frac{1}{20 \ &Omega;}} + {\frac{1}{30 \ &Omega;}} + {\frac{1}{40 \ &Omega;}}</math>
<math>{\frac{1}{R_{equivalent}}} = {\frac{25}{120}} \ &Omega;</math>

==Connectedness==
#How is this topic connected to something that you are interested in?
#How is it connected to your major?
#Is there an interesting industrial application?

==History==

Put this idea in historical context. Give the reader the Who, What, When, Where, and Why.

== See also ==

Are there related topics or categories in this wiki resource for the curious reader to explore?  How does this topic fit into that context?

===Further reading===

Books, Articles or other print media on this topic

===External links===

Internet resources on this topic

==References==

This section contains the the references you used while writing this page

[[Category:Which Category did you place this in?]]