Memory Storage Devices: Difference between revisions

From Physics Book
Jump to navigation Jump to search
No edit summary
 
(25 intermediate revisions by the same user not shown)
Line 1: Line 1:
--[[User:Donghyun727|Donghyun727]] ([[User talk:Donghyun727|talk]]) 18:49, 5 December 2015 (EST)Lee Dong Hyun
--[[User:Donghyun727|Lee Dong Hyun dlee682]] ([[User talk:Donghyun727|talk]]) 19:06, 5 December 2015 (EST)


Magnetic storage devices use the method of magnetic recording to preserve data.
Magnetic storage devices use the method of magnetic recording to preserve data.
Line 6: Line 6:
== Magnetic recording ==
== Magnetic recording ==


Magnetic recording is a process where portions of a magnetic material are selectively magnetized with the use of electrical signals. The first use of this kind of technique was introduced by a Danish engineer Valdemar Poulsen in 1900. He created a machine called telegraphone that allowed him to record speech magnetically on a steel wire, and this became the start of many storage devices that are existent today.
Magnetic recording is a process where portions of a magnetic material are selectively magnetized with the use of electrical signals.  


== History of recording devices ==
As technology improved significantly over time, a wide number of recording devices have been introduced.
=== Telegraphone ===
The first use of this kind of technique was introduced by a Danish engineer Valdemar Poulsen in 1900. He created a machine called telegraphone that allowed him to record speech magnetically on a steel wire, and this became the start of many storage devices that are existent today. After the introduction, he continued to develop the technology and improved the sound quality through the use of direct current onto the recording head. However, the signals were weak and difficult to amplify, with the quality of the product highly fluctuating and thus unreliable.
[[File:telegraphone.jpg]]
=== Magnetophone ===
The Magnetophone was developed in Germany in the 1930s, when other kinds of magnetic recorders were being developed in countries such as Britain, USA, and Japan. It started from Ludwig Blattner, who bought the rights of the steel tape device and modified it into the Blattnerphone. The magnetophone an improved version of the existing telegraphone in that it was portable and it contained its own amplifier and speaker. Also, it no longer used the highly unreliable steel wire and used reels of acetate tape and magnetite coating. Further improvements down the line replaced the use of DC currents to AC currents, which allowed production of a 60 dB dynamic range of sound.
=== VTR (Videotape recorder) ===
The videotape recorder was the next greatest innovation in the recording industry, as it was the first machine which allowed recording of video onto a tape. However, it didn't become popular until the cassette format was introduced by Sony in the 1970s, which revolutionized the videotape industry. Improvements along the line led to the development of Walkman, which was one of the greatest successes for a portable videotape recorder, distributed all over the world. According to Sony, 100 million units were sold in the U.S alone during the 20 years of Walkman devices. Walkman was the first product which was able to effectively tackle the issue of inconsistency in quality, and was extremely convenient in its portability.
[[File:walkman.jpg]]
=== Floppy disk ===
As far as the computer industry is concerned, one of the most significant developments of the 1970s was the floppy disk. The introduction of the floppy disk from IBM perfectly matched the emergence of microprocessors from Intel, making them complimentary products. The first versions of the floppy disk could hold up to 800 KB, and became a necessity for many people who used computers and had to transfer data in a portable mode. The most improved versions of the floppy disk held up to 1200 KB.
[[File:floppydisk.jpg]]
=== HDD (Hard Disk Drive) and SSD (Solid State Drive) ===
The two most advanced versions of data storage available today are hard disk drives and solid-state drives. Hard disk drives became a necessary component for computer users, with the primary features being capacity and performance. The most recent hard disk drives can store data more than 1TB (=1000GB), and can store, read and transfer data at a very high speed. Solid-state drives are very competitive when it comes to reliability, as the flash memory the device uses have very rapid access speed of data. Hard disk drives, however, has a lower price-per-bit as compared to SSD.
[[File:HDD.jpg]]  [[File:SSD2.jpg]]


== How it works ==
== How it works ==


Magnetic recording  
The main physics behind magnetic recording involves specific patterns of magnetization on a track which corresponds to specific signals to be stored. The signals triggers the magnetization of the material as it passes through the recording device, and the remnants of the magnetization are the codes which become the basis of the storage of the data. To retrieve the data stored, the reverse process happens: the magnetization is detected by the reader which reproduces the signal that initially triggered the magnetization. The two earliest versions of this recording were longitudinal recording and perpendicular recording.
[[File:recording method.png]]




Line 17: Line 48:
=== Analog Recording ===
=== Analog Recording ===


Analog recording was the most popular method used when tapes were the most prevalent recording devices. The tape would run at a constant speed, and the writing head magnetizes the tape in response to the signals required to record a particular piece of data. Once a magnetization distribution is completed to store the relevant data, this distribution can be read out to replay the original signal which triggered the magnetization. The commonly used magnetic particles for this method are Iron oxide particles or Chromium oxide.


Analog recording was the most popular method used when tapes were the most prevalent recording devices. The tape would run at a constant speed, and the writing head magnetizes the tape in response to the signals required to record a particular piece of data. Once a magnetization distribution is completed to store the relevant data, this distribution can be read out to replay the original signal which triggered the magnetization. The commonly used magnetic particles for this method are Iron oxide particles or Chromium oxide.
[[File:analog recording.gif]]


Figure 1: Magnetic Write Head Schematics
=== Digital Recording ===
Digital recording can be considered a more advanced method of recording, as instead of creating a magnetization distribution, digital recording makes use of magnetic states. The method involves the usage of two stable magnetic states, which are the +Ms and the -Ms on a hysteresis loop. This converts into a binary code of 0 and 1 to construct a data of existence/non-existence of signal in the particular area of recording medium. This is a technique which is used to create devices such as floppy disks and the currently popular hard disk drives.


Magnetic recording consists of leaving patterns of remanent magnetization on a track within the surface of magnetic media that sits on top of a non-magnetic substrate. There are three main orientations of the magnetization with respect to the track, lateral (hardly ever used), longitudinal (the current standard), and perpendicular (Figure 2).
[[File:Digital recording.gif]]


Figure 2:Longitudinal, perpendicular, and lateral recording.


Most common is longitudinal recording. For this type of recording, the transducer, or recording head, is a ring-shaped electromagnet with a gap at the surface facing the media. When the head is fed with a current, the fringing field from the gap magnetizes the magnetic media, as is shown in Figure 3. The media moves at constant velocity under the recording head, as is shown in Figure 1. The temporal changes in the current leave spatial variations in the remanent magnetization along the length of the track.
== References ==
"Magnetic Recording | Electronics." Encyclopedia Britannica Online. Encyclopedia Britannica. Web. 6 Dec. 2015. <http://www.britannica.com/topic/magnetic-recording>.


Figure 3: Magnetic Write Head Schematics: Functioning of the Gap
"COEN 180." COEN 180. Web. 6 Dec. 2015. <http://www.cse.scu.edu/~tschwarz/coen180_04/LN/physics.html>.


The recorded magnetization creates a pattern of magnetic fields that can be picked up be the media moving under the read head. Under ideal circumstances, the magnetization corresponds to that of bars of permanent magnetic material aligned as shown in Figure 4.
"ANALOG RECORDING OF SOUND." Analog Recording. Web. 6 Dec. 2015. <http://artsites.ucsc.edu/EMS/music/tech_background/te-19/teces_19.html>.


"Basics of Digital Recording." Digital Recording. Web. 6 Dec. 2015. <http://artsites.ucsc.edu/EMS/music/tech_background/TE-16/teces_16.html>.


Figure 4:Ideal Magnetization of Track
"SPring-8, the Large Synchrotron Radiation Facility." Novel Magnetic Material Discovered in Meteorite — SPring-8 Web Site. Web. 6 Dec. 2015. <http://www.spring8.or.jp/en/news_publications/research_highlights/no_51/>.


Traditionally, the read head was the same type of a ring-shaped electromagnet with a gap, in practice the write head doubled as the read head. The changes in the magnetic fields on the track would induce a read current that reflects the changes in the magnetic flux. Figure 5 shows the idealized relation between the writing of a track and the subsequent reading of the track. The write current controls directly the orientation of the magnetic field emanating from the gap. Under ideal circumstances, the track magnetization switches orientation exactly under the head position when the write current switched. Since however the head is some distance of the track, and since thus the head magnitizes the media some distance away from the head, the switch in the current overwrites a small portion of the immediate preceeding magnetization. (This is dealt with in write precompensation, where the write current is switched slightly later to take this effect into account.) In addition, the magnetization of surrounding material affects the magnetization at any given point. As a result, the border between magnetization zones is in practice never straight but shows a wild zig-zag pattern. If the same head passes over the track, the flux changes emanating from the magnetization pattern on the track induce a current. Since the head picks up flux changes and ultimately magnetization changes from some distance, the induced current is not a single spike, but is somewhat spread out. Other than that, the read current is the derivative of the write current. By "peak detection" (e.g., electronic differnentiation and zero crossing detection), a magnetic read discovers the flux changes and ultimately the historic changes in the write current that encode the stored data.
"The History of Magnetic Recording." The History of Magnetic Recording. Web. 6 Dec. 2015. <http://www.aes.org/aeshc/docs/recording.technology.history/magnetic4.html>.


Figure 5:Writing and Reading with a Gap Head. From top to bottom: write current, magnetization pattern, read current.
"Inventing the Wire Recorder." History of the Wire Recorder. Web. 6 Dec. 2015. <http://www.recording-history.org/HTML/wire2.php>.


Perpendicular recording is done with a probe device (Figure 6). Perpendicular recording has no inherent advantages over longitudinal recording, but is being pursued in parallel by the magnetic recording industry because of the potential of better magnetization retention in some materials. Devices like MEMS are probe devices and would use perpendicular recording.
"RIP Walkman: Goodbye after 30 Years." The Guardian. Web. 6 Dec. 2015. <http://www.theguardian.com/music/musicblog/2010/oct/25/rip-walkman-30-years>.


Figure 6:Perpendicular Recording with a Probe Head.
"MCE Technologies." MCE Technologies. Web. 6 Dec. 2015. <http://store.mcetech.com/mm/merchant.mvc?Store_Code=MTOS&Screen=PROD&Product_Code=LSP500GSSD>


Nowadays, reading magnetic tracks is done using the magneto-resistive effect (Figure 7). The resistance of certain materials changes noticeably if a magnetic field is applied to them. The magnetic field alters the direction of a current slightly. The resistance of the magneto-resistive compound increases noticeably if the current direction is not aligned with the cristalline structure. This effect can be used to directly measure the magnetic flux, and hence the magnetization patterns on the track.
Anton, Shilov. "Western Digital Retains Hard Disk Drive Market Share Leadership." KitGuru RSS. Kitguru, 30 Apr. 2014. Web. 6 Dec. 2015. <http://www.kitguru.net/components/hard-drives/anton-shilov/western-digital-retains-hard-disk-drive-market-share-leadership/>.


Figure 7:Magneto-Resistive Effect: The magnetic field (red) moves the electron flow in the sense current (yellow) up by an angle θ. The magneto-resistive material is in blue, the current conducts in brown.
"Floppy Disks." Floppy Disks. Web. 6 Dec. 2015. <http://cws.gtc.edu/departments/Library/Library Technology Tips webpage/floppy_disks.htm>.

Latest revision as of 21:03, 5 December 2015

--Lee Dong Hyun dlee682 (talk) 19:06, 5 December 2015 (EST)

Magnetic storage devices use the method of magnetic recording to preserve data.


Magnetic recording

Magnetic recording is a process where portions of a magnetic material are selectively magnetized with the use of electrical signals.

History of recording devices

As technology improved significantly over time, a wide number of recording devices have been introduced.

Telegraphone

The first use of this kind of technique was introduced by a Danish engineer Valdemar Poulsen in 1900. He created a machine called telegraphone that allowed him to record speech magnetically on a steel wire, and this became the start of many storage devices that are existent today. After the introduction, he continued to develop the technology and improved the sound quality through the use of direct current onto the recording head. However, the signals were weak and difficult to amplify, with the quality of the product highly fluctuating and thus unreliable.

Magnetophone

The Magnetophone was developed in Germany in the 1930s, when other kinds of magnetic recorders were being developed in countries such as Britain, USA, and Japan. It started from Ludwig Blattner, who bought the rights of the steel tape device and modified it into the Blattnerphone. The magnetophone an improved version of the existing telegraphone in that it was portable and it contained its own amplifier and speaker. Also, it no longer used the highly unreliable steel wire and used reels of acetate tape and magnetite coating. Further improvements down the line replaced the use of DC currents to AC currents, which allowed production of a 60 dB dynamic range of sound.

VTR (Videotape recorder)

The videotape recorder was the next greatest innovation in the recording industry, as it was the first machine which allowed recording of video onto a tape. However, it didn't become popular until the cassette format was introduced by Sony in the 1970s, which revolutionized the videotape industry. Improvements along the line led to the development of Walkman, which was one of the greatest successes for a portable videotape recorder, distributed all over the world. According to Sony, 100 million units were sold in the U.S alone during the 20 years of Walkman devices. Walkman was the first product which was able to effectively tackle the issue of inconsistency in quality, and was extremely convenient in its portability.

Floppy disk

As far as the computer industry is concerned, one of the most significant developments of the 1970s was the floppy disk. The introduction of the floppy disk from IBM perfectly matched the emergence of microprocessors from Intel, making them complimentary products. The first versions of the floppy disk could hold up to 800 KB, and became a necessity for many people who used computers and had to transfer data in a portable mode. The most improved versions of the floppy disk held up to 1200 KB.


HDD (Hard Disk Drive) and SSD (Solid State Drive)

The two most advanced versions of data storage available today are hard disk drives and solid-state drives. Hard disk drives became a necessary component for computer users, with the primary features being capacity and performance. The most recent hard disk drives can store data more than 1TB (=1000GB), and can store, read and transfer data at a very high speed. Solid-state drives are very competitive when it comes to reliability, as the flash memory the device uses have very rapid access speed of data. Hard disk drives, however, has a lower price-per-bit as compared to SSD.

How it works

The main physics behind magnetic recording involves specific patterns of magnetization on a track which corresponds to specific signals to be stored. The signals triggers the magnetization of the material as it passes through the recording device, and the remnants of the magnetization are the codes which become the basis of the storage of the data. To retrieve the data stored, the reverse process happens: the magnetization is detected by the reader which reproduces the signal that initially triggered the magnetization. The two earliest versions of this recording were longitudinal recording and perpendicular recording.


Recording methods

Analog Recording

Analog recording was the most popular method used when tapes were the most prevalent recording devices. The tape would run at a constant speed, and the writing head magnetizes the tape in response to the signals required to record a particular piece of data. Once a magnetization distribution is completed to store the relevant data, this distribution can be read out to replay the original signal which triggered the magnetization. The commonly used magnetic particles for this method are Iron oxide particles or Chromium oxide.

Digital Recording

Digital recording can be considered a more advanced method of recording, as instead of creating a magnetization distribution, digital recording makes use of magnetic states. The method involves the usage of two stable magnetic states, which are the +Ms and the -Ms on a hysteresis loop. This converts into a binary code of 0 and 1 to construct a data of existence/non-existence of signal in the particular area of recording medium. This is a technique which is used to create devices such as floppy disks and the currently popular hard disk drives.


References

"Magnetic Recording | Electronics." Encyclopedia Britannica Online. Encyclopedia Britannica. Web. 6 Dec. 2015. <http://www.britannica.com/topic/magnetic-recording>.

"COEN 180." COEN 180. Web. 6 Dec. 2015. <http://www.cse.scu.edu/~tschwarz/coen180_04/LN/physics.html>.

"ANALOG RECORDING OF SOUND." Analog Recording. Web. 6 Dec. 2015. <http://artsites.ucsc.edu/EMS/music/tech_background/te-19/teces_19.html>.

"Basics of Digital Recording." Digital Recording. Web. 6 Dec. 2015. <http://artsites.ucsc.edu/EMS/music/tech_background/TE-16/teces_16.html>.

"SPring-8, the Large Synchrotron Radiation Facility." Novel Magnetic Material Discovered in Meteorite — SPring-8 Web Site. Web. 6 Dec. 2015. <http://www.spring8.or.jp/en/news_publications/research_highlights/no_51/>.

"The History of Magnetic Recording." The History of Magnetic Recording. Web. 6 Dec. 2015. <http://www.aes.org/aeshc/docs/recording.technology.history/magnetic4.html>.

"Inventing the Wire Recorder." History of the Wire Recorder. Web. 6 Dec. 2015. <http://www.recording-history.org/HTML/wire2.php>.

"RIP Walkman: Goodbye after 30 Years." The Guardian. Web. 6 Dec. 2015. <http://www.theguardian.com/music/musicblog/2010/oct/25/rip-walkman-30-years>.

"MCE Technologies." MCE Technologies. Web. 6 Dec. 2015. <http://store.mcetech.com/mm/merchant.mvc?Store_Code=MTOS&Screen=PROD&Product_Code=LSP500GSSD>

Anton, Shilov. "Western Digital Retains Hard Disk Drive Market Share Leadership." KitGuru RSS. Kitguru, 30 Apr. 2014. Web. 6 Dec. 2015. <http://www.kitguru.net/components/hard-drives/anton-shilov/western-digital-retains-hard-disk-drive-market-share-leadership/>.

"Floppy Disks." Floppy Disks. Web. 6 Dec. 2015. <http://cws.gtc.edu/departments/Library/Library Technology Tips webpage/floppy_disks.htm>.

Retrieved from "http://www.physicsbook.gatech.edu/index.php?title=Memory_Storage_Devices&oldid=18235"