Electric Motors: Difference between revisions
Ajohnson738 (talk | contribs) Rewrite (Andrew Johnson, Fall 2026): added mathematical model for motors/generators/back emf, computational model, simple/middling/difficult examples; fixed physics errors; removed uncredited images; added original figures and references. |
Ajohnson738 (talk | contribs) Display images at full size (server cannot generate thumbnails). |
||
| Line 13: | Line 13: | ||
Energy is conserved in both directions. A spinning motor coil also has a changing flux through it, so it generates its own '''back emf''' that opposes the supply voltage. When a generator delivers current, the magnetic torque on that current opposes the rotation (Lenz's law), so whatever is turning the generator has to do work. A generator never makes energy from nothing. It converts mechanical work into electrical energy. | Energy is conserved in both directions. A spinning motor coil also has a changing flux through it, so it generates its own '''back emf''' that opposes the supply voltage. When a generator delivers current, the magnetic torque on that current opposes the rotation (Lenz's law), so whatever is turning the generator has to do work. A generator never makes energy from nothing. It converts mechanical work into electrical energy. | ||
[[File:Coil_in_field_topview_AJ.png| | [[File:Coil_in_field_topview_AJ.png|frame|center|Top view of a coil rotating in a uniform field. The orange line is the coil seen edge-on; its two long sides (length h) point into the page and move with speed v = ωw/2. θ is the angle between the coil's normal (the direction of its magnetic moment) and the field. (Original diagram made by the author.)]] | ||
===A Mathematical Model=== | ===A Mathematical Model=== | ||
| Line 33: | Line 33: | ||
Real motors use many coils set at different angles, which smooths the torque until it is nearly constant. | Real motors use many coils set at different angles, which smooths the torque until it is nearly constant. | ||
[[File:DC_motor_torque_AJ.png| | [[File:DC_motor_torque_AJ.png|frame|center|Torque on a single-loop motor. Without a commutator the torque reverses every half turn and the coil just oscillates. With a commutator the torque always pushes the same way. (Original graph made by the author.)]] | ||
'''2. Flux and induced emf (the generator).''' If the coil spins at constant angular speed <math>\omega</math>, then <math>\theta = \omega t</math> and the flux through all <math>N</math> turns is | '''2. Flux and induced emf (the generator).''' If the coil spins at constant angular speed <math>\omega</math>, then <math>\theta = \omega t</math> and the flux through all <math>N</math> turns is | ||
| Line 49: | Line 49: | ||
The short sides contribute nothing, because the force on their charges points across the wire instead of along it. Notice that the emf is largest when the flux is ''zero'' (coil edge-on to the field) and zero when the flux is largest. The emf depends on how fast the flux is ''changing'', not on how big it is. | The short sides contribute nothing, because the force on their charges points across the wire instead of along it. Notice that the emf is largest when the flux is ''zero'' (coil edge-on to the field) and zero when the flux is largest. The emf depends on how fast the flux is ''changing'', not on how big it is. | ||
[[File:Generator_flux_emf_AJ.png| | [[File:Generator_flux_emf_AJ.png|frame|center|Flux through the coil and induced emf for a generator turning at constant speed. The emf is 90° out of phase with the flux. (Original graph made by the author.)]] | ||
'''3. Back emf and the motor circuit.''' A real DC motor has a supply voltage <math>V</math>, a coil (armature) resistance <math>R</math>, and a back emf that grows with speed. For an idealized multi-coil motor it is convenient to write <math>\mathcal{E}_{back} = k\omega</math> and <math>\tau = kI</math>, using the same motor constant <math>k</math> (about <math>NBA</math>) in both. Then | '''3. Back emf and the motor circuit.''' A real DC motor has a supply voltage <math>V</math>, a coil (armature) resistance <math>R</math>, and a back emf that grows with speed. For an idealized multi-coil motor it is convenient to write <math>\mathcal{E}_{back} = k\omega</math> and <math>\tau = kI</math>, using the same motor constant <math>k</math> (about <math>NBA</math>) in both. Then | ||
| Line 76: | Line 76: | ||
The GlowScript model below spins a 200-turn coil in a 0.5 T field. At each time step it computes the flux, gets the emf ''numerically'' from Faraday's law (<math>\mathcal{E} \approx -\Delta(N\Phi_B)/\Delta t</math>), and plots it against the analytic prediction <math>NBA\omega\sin(\omega t)</math>. The red dots land on the black curve, which confirms the formula above. Try changing <code>N</code>, <code>Bmag</code>, <code>w</code>, <code>h</code> or <code>f</code> in the code and watch the peak emf scale with each one. | The GlowScript model below spins a 200-turn coil in a 0.5 T field. At each time step it computes the flux, gets the emf ''numerically'' from Faraday's law (<math>\mathcal{E} \approx -\Delta(N\Phi_B)/\Delta t</math>), and plots it against the analytic prediction <math>NBA\omega\sin(\omega t)</math>. The red dots land on the black curve, which confirms the formula above. Try changing <code>N</code>, <code>Bmag</code>, <code>w</code>, <code>h</code> or <code>f</code> in the code and watch the peak emf scale with each one. | ||
[[File:Generator_model_animation_AJ.gif|center | [[File:Generator_model_animation_AJ.gif|frame|center|Output of the generator model. Left: the coil spinning in the field. Right: flux linkage (blue), emf computed numerically from Faraday's law (red dots), and the analytic prediction (black). (Original animation made by the author.)]] | ||
'''Run it yourself:''' [https://www.glowscript.org/#/user/andrewbjohnson06/folder/MyPrograms/program/ElectricGenerator AC generator model on GlowScript.org] (it runs right in your browser; click "Edit this program" there to change the parameters). | '''Run it yourself:''' [https://www.glowscript.org/#/user/andrewbjohnson06/folder/MyPrograms/program/ElectricGenerator AC generator model on GlowScript.org] (it runs right in your browser; click "Edit this program" there to change the parameters). | ||
| Line 234: | Line 234: | ||
==History== | ==History== | ||
[[File:Thomas_Davenport.jpg| | [[File:Thomas_Davenport.jpg|frame|Thomas Davenport, who received the first US patent for an electric motor in 1837 (public-domain 19th-century portrait).]] | ||
*'''1820 – Hans Christian Ørsted''' noticed that a current-carrying wire deflects a nearby compass needle. This was the first evidence that electricity and magnetism are connected. André-Marie Ampère quickly built a mathematical description of the forces between currents. | *'''1820 – Hans Christian Ørsted''' noticed that a current-carrying wire deflects a nearby compass needle. This was the first evidence that electricity and magnetism are connected. André-Marie Ampère quickly built a mathematical description of the forces between currents. | ||
Latest revision as of 12:38, 20 November 2026
Claimed by Andrew Johnson, Fall 2026
This page explains how electric motors and generators work. Both are built from the same thing, a coil of wire that can spin inside a magnetic field. A motor uses the magnetic torque on a current-carrying coil to turn electrical energy into rotation. A generator does the reverse: it spins a coil so that the changing magnetic flux induces an emf (Faraday's law).
The Main Idea
A motor and a generator are the same machine run in opposite directions.
- Motor: Push a current through a coil that sits in a magnetic field. The field exerts a torque on the coil's magnetic dipole moment [math]\displaystyle{ \vec{\mu} }[/math] and tries to line it up with [math]\displaystyle{ \vec{B} }[/math]. If nothing else happened, the coil would rock back and forth around the aligned position and stop, like a compass needle. To keep it turning, a motor reverses the current in the coil every half turn, just as the coil swings through the aligned position. In a simple DC motor a split-ring commutator does this automatically: two half-rings on the axle rub against fixed brushes, and they swap which brush touches which end of the coil every half revolution. Modern brushless motors do the same switching with electronics instead.
- Generator: Turn the same coil with an outside source of mechanical work, such as a steam turbine, a water wheel, wind, or a hand crank. As it rotates, the magnetic flux through it keeps changing, and Faraday's law says a changing flux induces an emf around the loop. Because the flux rises and falls smoothly as the coil turns, the emf is sinusoidal. That is alternating current (AC), the kind that comes out of a wall outlet. A generator fitted with a commutator flips the output every half turn and produces a bumpy but one-directional (DC) output instead.
Energy is conserved in both directions. A spinning motor coil also has a changing flux through it, so it generates its own back emf that opposes the supply voltage. When a generator delivers current, the magnetic torque on that current opposes the rotation (Lenz's law), so whatever is turning the generator has to do work. A generator never makes energy from nothing. It converts mechanical work into electrical energy.

A Mathematical Model
Model the rotor as a flat coil of [math]\displaystyle{ N }[/math] turns and area [math]\displaystyle{ A }[/math] (for a rectangle of width [math]\displaystyle{ w }[/math] and height [math]\displaystyle{ h }[/math], [math]\displaystyle{ A = wh }[/math]), in a uniform field [math]\displaystyle{ B }[/math]. Let [math]\displaystyle{ \theta }[/math] be the angle between the coil's normal [math]\displaystyle{ \hat{n} }[/math] and [math]\displaystyle{ \vec{B} }[/math].
1. Magnetic moment and torque (the motor). A coil carrying current [math]\displaystyle{ I }[/math] has magnetic dipole moment
- [math]\displaystyle{ \vec{\mu} = NIA\,\hat{n} }[/math]
and the field exerts a torque on it:
- [math]\displaystyle{ \vec{\tau} = \vec{\mu}\times\vec{B} \qquad\Rightarrow\qquad \tau = NIAB\sin\theta }[/math]
The torque is largest, [math]\displaystyle{ \tau_{max} = NIAB }[/math], when the plane of the coil is parallel to [math]\displaystyle{ \vec{B} }[/math] ([math]\displaystyle{ \theta = 90^\circ }[/math]). It is zero when the coil faces the field ([math]\displaystyle{ \theta = 0^\circ }[/math]). For a single loop with a commutator, [math]\displaystyle{ \tau \propto |\sin\theta| }[/math], and the average over a full turn is
- [math]\displaystyle{ \tau_{avg} = \frac{2}{\pi}NIAB \approx 0.64\,NIAB }[/math]
Real motors use many coils set at different angles, which smooths the torque until it is nearly constant.

2. Flux and induced emf (the generator). If the coil spins at constant angular speed [math]\displaystyle{ \omega }[/math], then [math]\displaystyle{ \theta = \omega t }[/math] and the flux through all [math]\displaystyle{ N }[/math] turns is
- [math]\displaystyle{ N\Phi_B = NBA\cos(\omega t) }[/math]
Faraday's law gives the emf:
- [math]\displaystyle{ \mathcal{E} = -\frac{d(N\Phi_B)}{dt} = NBA\omega\sin(\omega t), \qquad \mathcal{E}_{max} = NBA\omega }[/math]
You get the same answer from the magnetic force on the moving charges (motional emf). In the top-view figure, each long side of length [math]\displaystyle{ h }[/math] moves at speed [math]\displaystyle{ v = \omega w/2 }[/math]. Only the part of the velocity perpendicular to [math]\displaystyle{ \vec{B} }[/math] matters, so each side contributes [math]\displaystyle{ vBh\sin\theta }[/math]. The two sides add:
- [math]\displaystyle{ \mathcal{E} = 2\left(\frac{\omega w}{2}\right)Bh\sin\theta = \omega B(wh)\sin\theta = BA\omega\sin\theta \quad\text{(per turn)} }[/math]
The short sides contribute nothing, because the force on their charges points across the wire instead of along it. Notice that the emf is largest when the flux is zero (coil edge-on to the field) and zero when the flux is largest. The emf depends on how fast the flux is changing, not on how big it is.

3. Back emf and the motor circuit. A real DC motor has a supply voltage [math]\displaystyle{ V }[/math], a coil (armature) resistance [math]\displaystyle{ R }[/math], and a back emf that grows with speed. For an idealized multi-coil motor it is convenient to write [math]\displaystyle{ \mathcal{E}_{back} = k\omega }[/math] and [math]\displaystyle{ \tau = kI }[/math], using the same motor constant [math]\displaystyle{ k }[/math] (about [math]\displaystyle{ NBA }[/math]) in both. Then
- [math]\displaystyle{ I = \frac{V - \mathcal{E}_{back}}{R} = \frac{V - k\omega}{R} }[/math]
- At start-up ([math]\displaystyle{ \omega = 0 }[/math]) there is no back emf, so the current and torque are largest. This is the stall current [math]\displaystyle{ V/R }[/math].
- With no load, the motor speeds up until [math]\displaystyle{ k\omega \approx V }[/math], so the no-load speed is [math]\displaystyle{ \omega_0 \approx V/k }[/math].
4. Power and efficiency. Mechanical power is torque times angular speed (or force dotted with velocity for straight-line motion):
- [math]\displaystyle{ P_{mech} = \tau\omega \qquad \left(\text{or } \vec{F}\cdot\vec{v}\right) }[/math]
Energy conservation in the motor circuit says that electrical input equals mechanical output plus resistive heating:
- [math]\displaystyle{ VI = \mathcal{E}_{back}I + I^2R \qquad\text{where}\qquad \mathcal{E}_{back}I = k\omega I = \tau\omega = P_{mech} }[/math]
so the efficiency is
- [math]\displaystyle{ \eta = \frac{P_{mech}}{P_{elec}} = \frac{\tau\omega}{VI} }[/math]
For a generator driving a load resistance [math]\displaystyle{ R_L }[/math], the instantaneous electrical power is [math]\displaystyle{ \mathcal{E}I = \mathcal{E}^2/R_L }[/math]. That has to equal the mechanical power [math]\displaystyle{ \tau_{applied}\,\omega }[/math] supplied by whatever is turning the shaft. This is why a generator gets harder to turn when you connect a bigger load (more current means more opposing torque).
A Computational Model
The GlowScript model below spins a 200-turn coil in a 0.5 T field. At each time step it computes the flux, gets the emf numerically from Faraday's law ([math]\displaystyle{ \mathcal{E} \approx -\Delta(N\Phi_B)/\Delta t }[/math]), and plots it against the analytic prediction [math]\displaystyle{ NBA\omega\sin(\omega t) }[/math]. The red dots land on the black curve, which confirms the formula above. Try changing N, Bmag, w, h or f in the code and watch the peak emf scale with each one.

Run it yourself: AC generator model on GlowScript.org (it runs right in your browser; click "Edit this program" there to change the parameters).
The full code is below. You can also copy it into a new program at glowscript.org and run it there.
Web VPython 3.2
# AC generator: a rectangular coil spinning in a uniform magnetic field.
# The program computes the flux through the coil at every time step and gets the
# emf NUMERICALLY from Faraday's law (emf = -d(N*Phi)/dt), then compares it with
# the analytic prediction emf = N*B*A*omega*sin(omega*t).
scene.title = "AC generator: coil rotating in a uniform magnetic field (drag with right mouse to rotate view)"
scene.width = 640
scene.height = 400
scene.range = 0.16
scene.forward = vector(-0.4, -0.5, -1)
# ---------------- physical parameters (edit these!) ----------------
Bmag = 0.5 # field strength (T)
B = vector(Bmag, 0, 0) # uniform field pointing in +x
N = 200 # number of turns
w = 0.10 # coil width (m)
h = 0.10 # coil height (m), along the axle
A = w*h # coil area (m^2)
f = 1.0 # rotation frequency (Hz) - kept slow so you can watch it
omega = 2*pi*f # angular speed (rad/s)
# ---------------- scenery ----------------
box(pos=vector(-0.13, 0, 0), size=vector(0.04, 0.16, 0.16), color=color.red) # N pole
box(pos=vector( 0.13, 0, 0), size=vector(0.04, 0.16, 0.16), color=color.blue) # S pole
for y in [-0.05, 0, 0.05]:
for z in [-0.05, 0.05]:
arrow(pos=vector(-0.11, y, z), axis=vector(0.22, 0, 0), shaftwidth=0.002,
color=color.gray(0.6), opacity=0.4)
cylinder(pos=vector(0, -0.09, 0), axis=vector(0, 0.18, 0), radius=0.002, color=color.white) # axle
# coil corners in the coil's own frame (its normal points along +x when theta = 0)
corners = [vector(0, -h/2, -w/2), vector(0, -h/2, w/2), vector(0, h/2, w/2),
vector(0, h/2, -w/2), vector(0, -h/2, -w/2)]
coil = curve(pos=corners, radius=0.003, color=color.orange)
normal = arrow(pos=vector(0, 0, 0), axis=vector(0.06, 0, 0), shaftwidth=0.004, color=color.yellow)
info = label(pos=vector(0, 0.125, 0), text="", box=False, height=12)
# ---------------- graphs ----------------
g1 = graph(title="Flux linkage and emf vs time", xtitle="t (s)", ytitle="N*Phi (Wb) and emf (V)",
width=640, height=260)
flux_plot = gcurve(graph=g1, color=color.blue, label="N*Phi_B (Wb)")
emf_plot = gdots(graph=g1, color=color.red, size=3, label="emf from Faraday's law (V)")
pred_plot = gcurve(graph=g1, color=color.black, label="N B A omega sin(omega t) (V)")
# ---------------- time loop ----------------
t = 0
dt = 0.005
prev_flux = N*Bmag*A # at t = 0 the coil normal is parallel to B
while t < 3:
rate(100)
theta = omega*t
# rotate each corner of the coil about the y-axis (the axle)
for i in range(len(corners)):
coil.modify(i, pos=rotate(corners[i], angle=theta, axis=vector(0, 1, 0)))
n_hat = rotate(vector(1, 0, 0), angle=theta, axis=vector(0, 1, 0))
normal.axis = 0.06*n_hat
flux = N*dot(B, n_hat)*A # N * B * A * cos(theta)
emf = -(flux - prev_flux)/dt # Faraday's law, done numerically
prev_flux = flux
if t > 0:
flux_plot.plot(t, flux)
emf_plot.plot(t, emf)
pred_plot.plot(t, N*Bmag*A*omega*sin(theta))
info.text = "t = " + str(round(t*100)/100) + " s emf = " + str(round(emf*100)/100) + " V predicted peak = " + str(round(N*Bmag*A*omega*100)/100) + " V"
t = t + dt
Examples
Simple
Problem: A generator coil has 200 turns, each with an area of 0.010 m². It spins at 60 revolutions per second in a uniform 0.50 T field. What is the maximum emf it produces?
Solution:
Convert the rotation rate to angular speed:
- [math]\displaystyle{ \omega = 2\pi f = 2\pi(60\ \text{Hz}) = 377\ \text{rad/s} }[/math]
The peak emf occurs when the coil is edge-on to the field:
- [math]\displaystyle{ \mathcal{E}_{max} = NBA\omega = (200)(0.50\ \text{T})(0.010\ \text{m}^2)(377\ \text{rad/s}) = 377\ \text{V} }[/math]
The output alternates between +377 V and −377 V sixty times per second. That frequency matches the 60 Hz power grid in the US.
Middling
Problem: A simple DC motor has a rectangular coil of 50 turns, measuring 4.0 cm × 5.0 cm, carrying 2.0 A in a uniform 0.30 T field.
- What is the maximum torque on the coil?
- What is the torque when the coil's normal makes a 30° angle with the field?
- With a split-ring commutator, what is the average torque over one revolution?
Solution:
- [math]\displaystyle{ A = (0.040\ \text{m})(0.050\ \text{m}) = 2.0\times10^{-3}\ \text{m}^2 }[/math]
- [math]\displaystyle{ \mu = NIA = (50)(2.0\ \text{A})(2.0\times10^{-3}\ \text{m}^2) = 0.20\ \text{A}\cdot\text{m}^2 }[/math]
- [math]\displaystyle{ \tau_{max} = \mu B = (0.20)(0.30) = 0.060\ \text{N}\cdot\text{m} }[/math], when the coil's plane is parallel to the field ([math]\displaystyle{ \theta = 90^\circ }[/math]).
- [math]\displaystyle{ \tau = \mu B\sin 30^\circ = (0.060)(0.50) = 0.030\ \text{N}\cdot\text{m} }[/math]
- [math]\displaystyle{ \tau_{avg} = \frac{2}{\pi}\tau_{max} = \frac{2}{\pi}(0.060) = 0.038\ \text{N}\cdot\text{m} }[/math]
A common mistake is to use [math]\displaystyle{ \cos\theta }[/math] here. The angle in [math]\displaystyle{ \tau = \mu B\sin\theta }[/math] is measured between the coil's normal (its [math]\displaystyle{ \vec{\mu} }[/math]) and [math]\displaystyle{ \vec{B} }[/math], not between the plane of the coil and [math]\displaystyle{ \vec{B} }[/math].
Difficult
Problem: A small DC motor runs from a 12.0 V battery. Its armature resistance is [math]\displaystyle{ R = 2.0\ \Omega }[/math] and its motor constant is [math]\displaystyle{ k = 0.050\ \text{V}\cdot\text{s/rad} }[/math] (so [math]\displaystyle{ \mathcal{E}_{back} = k\omega }[/math] and [math]\displaystyle{ \tau = kI }[/math]).
- Find the stall current and stall torque (the motor held so it cannot turn).
- Find the no-load speed.
- The motor drives a load that needs a steady torque of 0.10 N·m. Find the current, the operating speed, the mechanical output power, the heat lost in the coil, and the efficiency.
Solution:
(a) When the motor is stalled, [math]\displaystyle{ \omega = 0 }[/math], so there is no back emf:
- [math]\displaystyle{ I_{stall} = \frac{V}{R} = \frac{12.0}{2.0} = 6.0\ \text{A}, \qquad \tau_{stall} = kI_{stall} = (0.050)(6.0) = 0.30\ \text{N}\cdot\text{m} }[/math]
(b) With no load, the motor needs almost no torque, so [math]\displaystyle{ I \approx 0 }[/math] and the back emf rises to nearly the full battery voltage:
- [math]\displaystyle{ k\omega_0 = V \quad\Rightarrow\quad \omega_0 = \frac{12.0}{0.050} = 240\ \text{rad/s} \approx 2300\ \text{rpm} }[/math]
(c) At steady speed, the motor's torque equals the load torque:
- [math]\displaystyle{ I = \frac{\tau}{k} = \frac{0.10}{0.050} = 2.0\ \text{A} }[/math]
Use the circuit equation to find the back emf, then the speed:
- [math]\displaystyle{ \mathcal{E}_{back} = V - IR = 12.0 - (2.0)(2.0) = 8.0\ \text{V} \quad\Rightarrow\quad \omega = \frac{\mathcal{E}_{back}}{k} = \frac{8.0}{0.050} = 160\ \text{rad/s} }[/math]
Powers:
- [math]\displaystyle{ P_{elec} = VI = (12.0)(2.0) = 24\ \text{W} }[/math]
- [math]\displaystyle{ P_{mech} = \tau\omega = (0.10)(160) = 16\ \text{W} }[/math]
- [math]\displaystyle{ P_{heat} = I^2R = (2.0)^2(2.0) = 8.0\ \text{W} }[/math]
Check: [math]\displaystyle{ 16 + 8.0 = 24\ \text{W} }[/math], so energy is conserved.
- [math]\displaystyle{ \eta = \frac{16}{24} = 0.67 = 67\% }[/math]
Takeaway: A heavier load slows the motor down. That lowers the back emf, which lets more current flow, which produces more torque. This self-adjusting behavior is why a motor that jams can overheat quickly: at stall it draws its maximum current (6.0 A here), and all of the 72 W goes into heating the coil.
Connectedness
- How is this topic connected to something that you are interested in? I did undergraduate research in a cardiovascular fluid mechanics lab on rotors for left ventricular assist devices (LVADs). An LVAD is a small implanted pump that helps a failing heart move blood. Its rotor is spun by a compact brushless DC motor, which is exactly the coil-plus-magnet physics on this page. The rotor is often magnetically suspended so it never touches the housing.
- How is it connected to your major? In biomedical engineering, motors and generators show up everywhere in device design: infusion and syringe pumps, surgical drills and robots, centrifuges, ventilators, and powered prosthetic limbs. Choosing a motor means trading off exactly the quantities in the model above: torque, speed, current draw, efficiency, and heat. Heat matters even more for implanted or wearable devices.
- Is there an interesting industrial application? Electric vehicles use a single machine as both motor and generator. When the driver accelerates, the battery drives the motor. When the driver brakes, the wheels turn the motor as a generator (regenerative braking). The induced current charges the battery, and the opposing magnetic torque slows the car. On a much larger scale, almost all grid electricity, whether from coal, gas, nuclear, hydro, or wind, comes from a turbine spinning a generator coil inside a magnetic field.
History

- 1820 – Hans Christian Ørsted noticed that a current-carrying wire deflects a nearby compass needle. This was the first evidence that electricity and magnetism are connected. André-Marie Ampère quickly built a mathematical description of the forces between currents.
- 1821 – Michael Faraday built the first device that turned electrical energy into continuous motion, the "electromagnetic rotation" experiment. A current-carrying wire dipped in mercury circled around a fixed magnet.
- 1831 – Faraday discovered electromagnetic induction (a changing magnetic flux induces an emf) and built the Faraday disk, a copper disk spun between magnet poles. It was the first electric generator.
- 1832 – Hippolyte Pixii built a hand-cranked generator that spun a magnet near coils. It produced alternating current, and a commutator was added to turn its output into DC. The same year, William Sturgeon built one of the first commutator DC motors that could drive machinery.
- 1837 – Thomas Davenport, a Vermont blacksmith, received the first US patent for an electric motor.
- 1860s – Werner von Siemens and others developed the self-excited dynamo. It uses some of its own output current to power its electromagnets, which made large-scale generators practical.
- 1888 – Nikola Tesla patented the AC induction motor. Along with AC generators and transformers, it helped make alternating current the standard for the power grid.
See also
- Faraday's Law: the law behind every generator and the back emf in every motor
- Motional Emf: the force-on-moving-charges view of the generator emf
- Magnetic Flux
- Lenz's Law: why the generator's induced current opposes the rotation
- Magnetic Torque: the torque [math]\displaystyle{ \vec{\mu}\times\vec{B} }[/math] that drives a motor
- Magnetic Dipole Moment
- AC and DC
- Inductors: motor coils also have inductance, which matters when the current switches quickly
- Applying Magnetic Force to Currents
Further reading
- Feynman, R. P., Leighton, R. B., and Sands, M. The Feynman Lectures on Physics, Vol. II, Ch. 16 ("Induced Currents"), which discusses motors and generators. Free online at feynmanlectures.caltech.edu.
- Ling, S. J., Sanny, J., and Moebs, W. University Physics Volume 2 (OpenStax), Section 13.6, "Electric Generators and Back Emf." Free and openly licensed.
External links
- OpenStax University Physics Vol. 2: Electric Generators and Back Emf
- HyperPhysics: DC Motor
- HyperPhysics: Generator
- PhET simulation: Generator (interactive, free)
- Feynman Lectures Vol. II, Ch. 16
References
- Chabay, R. and Sherwood, B. Matter & Interactions, 4th ed., Wiley. Chapters on magnetic torque and Faraday's law (used for the physics, no text or figures copied).
- Ling, S. J., Sanny, J., and Moebs, W. (2016). University Physics Volume 2. OpenStax. https://openstax.org/books/university-physics-volume-2
- Nave, C. R. HyperPhysics, Georgia State University. http://hyperphysics.phy-astr.gsu.edu
- Feynman, R. P., Leighton, R. B., and Sands, M. The Feynman Lectures on Physics, Vol. II. https://www.feynmanlectures.caltech.edu
- "Electric motor" and "Timeline of the electric motor," Wikipedia (used for historical dates).
- All diagrams and graphs on this page (Coil_in_field_topview_AJ.png, Generator_flux_emf_AJ.png, DC_motor_torque_AJ.png, Generator_model_animation_AJ.gif) and the GlowScript model are original work by the author.