Elastic Collisions

CLAIMED BY SEAN FISCHER

The Main Idea

So what exactly is an elastic collision? I know you’re thinking, “Oh I know all about elasticity,” but LOL this is not bubble gum or rubber bands guys!

An elastic collision is a collision between two or more objects in which there is no loss in kinetic energy before and after the collision. If we assume that the colliding objects are part of the system and that there is no force from the surroundings, the final kinetic energy is still in the same form as it was initially. To keep it simple, this means that kinetic energy in= kinetic energy out. Remember how your parents always told you what goes in must come out? They were talking about elastic collisions... probably.

Additionally, elastic collisions are a wonderful representation of the conservation of momentum which states that the momentum of an isolated system is constant. For an isolated system undergoing an elastic collision momentum in = momentum out.

And I love playing pool because every time a ball hits another and they bounce off one another I’m witnessing an elastic collision so basically I’m a physicist in the lab. The image below demonstrates the main idea of an elastic collision. Boing!!

It's important to note that with macroscopic systems there are no perfectly elastic collisions because there's always at least a dab of dissipation (like some thermal energy given off), but most are nearly elastic. The only time there are perfect collisions is on a microscopic level when atomic systems with quantized energy collide, but that's only if there is enough energy available to raise the systems to an excited quantum state-- but quantum energy is really a whole other topic. Let's focus on elastic collisions!

Check out this funny video on elastic collisions also! https://www.youtube.com/watch?v=W9EqU1_DXUw

Now check out this more informative video on elastic collisions: https://www.youtube.com/watch?v=V4vzNk4qppw

A Mathematical Model

Now lets take what we know about elastic collisions and talk about it in mathematical terms. There are three main mathematical concepts surrounding elastic collisions:

---

---

Example Problem

Cart 1, moving in the positive x direction, collides with cart 2 moving in the negative x direction. Both carts have identical masses and the collisions is (nearly) elastic, as it would be if the carts interacted magnetically or repelled each other through soft springs. What are the final momenta of the two carts?

1. After choosing a correct system, surroundings, and initial and final states, we can apply the momentum principle mentioned above to get a relationship between the initial and final momentums of the two carts.

2. Next, by applying the energy principle we can gain knowledge about the final and initial kinetic energies. By acknowledging the fact that the change in internal energy is 0 and the fact the reaction happens so quickly that not work or heat transfer is done by the surroundings, the equation can be simplified to include just initial and final kinetic energies.

3. Once we have simplified the momentum and energy principles, one can use the relationship between kinetic energy and momentum mentioned above to get a relationship involving both energy and momentum. Once this is obtained, the equation can be shifted around to get both the final momentums.

A Computational Model

The link below demonstrates a basic car crash elastic collision using MATLAB. Take note of the changes in displacement and the time.

Elastic Collision MATLAB model

Examples

Be sure to show all steps in your solution and include diagrams whenever possible

Simple

Okay let’s start with a simple example like the ones you don't see on the test.

Jay and Sarah are best friends. Since they’re best friends they both weigh 55 kg. Jay hadn’t seen Sarah in a long time so when she saw her she ran to her with a velocity of <4,0,0> m/s. Instead of a hug, they were both too excited and collided and bounced back off of each other, and Sarah flew back with a velocity of <7,0,0> m/s. What was Jay’s final velocity?

Problem 1

In a lot of simple elastic collision problems, the momentum principle is all you need to solve them. Most problems will the initial velocities, masses, and one final velocity and you will be asked to solve for a either a final velocity or final momentum. By setting up an equation like the one in this problem, one can easily handle this type of problem.

Middling

When far apart, the momentum of a proton is <5.2 ✕ 10−21, 0, 0> kg · m/s as it approaches another proton that is initially at rest. The two protons repel each other electrically, but they are not close enough to touch. When they are far apart again later, one of the protons now has a velocity of <1.75, .82, 0> m/s. At that instant, what is the momentum of the other proton? HINT: Mass of proton is 1.7 *10^-27 kg.

Alright, don't freak out because this collision is on an atomic level, the idea is still the same!

Lets start out with that principle we mentioned before:

Pf= Pi

If we were given the momentum of both protons, we could both subtract one from the other but we only have one velocity and one momentum... but don't forget the hint! We can calculate that second momentum, let's do that first.

mass of proton*velocity=

1.7e-21 * <1.75, .82, 0> = <2.975e-21, 1.394e-21,0> kg * m/s

Okay so now that we have both momentums, we can just subtract the final from the initial right? Right!

<2.975e-21,1.394e-21,0> - <5.2e-21, 0, 0> = <-2.225e-21, -1.394e-21, 0> kg * m/s

There we go!

Difficult

Okay, let's get a little bit trickier here...

There is a 35 kg train travelling at 55 m/s that collides, elastically of course, with a random 2 kg trashcan that's stationary on the tracks. So afterwards, what are the speeds of both the train and the trashcan after the collision?

Let's start out with our handy-dandy momentum in = momentum our principle!

Pf= Pi

m1v1 + m2v2 = m1v1f + m2v2f

Wait, we have two unknowns! So let's plug in numbers:

35*55 + 2*0 = 35*v1f + 2*v2f

1925 = 35*v1f + 2*v2f

Let's multiply this equation by a random number

Let's use the kinetic energy principle now!

1/2mv1^2 = 1/2mv1f^2 + 1/2mv2f^2

Connectedness

So how are collisions connected to the real world? Collisions are all around us!

One main example is cars! Lots of car companies will purposely test and wreck cars to test collisions! Data is then sent to places like the Insurance Institute for Highway Safety where we can learn about car agility and more.

History

The history of collisions originates from the Rutherford Scattering experiment. As Rutherford studied the scattering of alpha particles through metal foils, he first noticed a collision with a single massive positive particle. This lead to the conclusion that the positive charge of the mass was concentrated in the center, the atomic nucleus!

See also

http://physicsbook.gatech.edu/Collisions for a general understanding of all collisions.

http://physicsbook.gatech.edu/inelastic_collisions to contrast them from elastic collisions.

Further reading

http://www.britannica.com/science/elastic-collision

External links

[1]

[2]

[3]

References

Main Idea:

Matter and Interactions, 4th Edition

http://www.sparknotes.com/testprep/books/sat2/physics/chapter9section4.rhtml

http://blogs.bu.edu/ggarber/archive/bua-physics/collisions-and-conservation-of-momentum/

History:

https://en.wikipedia.org/wiki/Elastic_collision

Connectedness:

http://www.iihs.org/

Additionally used references from see also.