Motional Emf using Faraday's Law: Difference between revisions

From Physics Book
Jump to navigation Jump to search
Line 24: Line 24:
Because the magnetic field is not constant, we can use Faraday's Law to solve for the motional emf.
Because the magnetic field is not constant, we can use Faraday's Law to solve for the motional emf.


As stated above, the formula is as follows:   
 
As stated above, the formula is as follows: <math>emf = -\frac{d}{dt} \int\! \vec{B} \cdot \vec{n}dA</math>
 
First, integrate the integral with respect to the area of the rectangle enclosed.
 
: <math>emf = -\frac{d}{dt} (\vec{B} \cdot \vec{n}A)</math>
 
We have the dimensions of the bar in variables: length <math>L</math> and width <math>x</math>.
Substitute these values for the area, <math>A</math>
 
:<math>emf = -\frac{d}{dt} (\vec{B} \cdot \vec{n}(L)(x))</math>
 
Now that we have this formula, we have to figure out how to take its derivative with respect to <math>t</math>. Which of the magnitudes of these values is changing?
:::The magnitude of the magnetic field is constant. (More "circles" are added as time increases, but the magnitude of each "circles" does not change.
:::The magnitude of the normal vector is constant.
:::The length, <math>L</math>, of the bar is constant.
:::The width of the surface enclosed, '''<math>x</math>''', '''changes'''.





Revision as of 19:49, 30 November 2015

Claimed by Chelsea Calhoun

The Main Idea

When a wire moves through an area of magnetic field, a current begins to flow along the wire as a result of magnetic forces. Originally, we learned to calculate the motional emf in a moving bar by using the equation [math]\displaystyle{ {\frac{q(\vec{v} \times \vec{B})L}{q}} }[/math]. However, there's an easier way to do this: by writing an equation for emf in terms of magnetic flux.

A Mathematical Model

We know that the magnitude of motional emf is equal to the rate of change of magnetic flux. [math]\displaystyle{ |emf| = \left|\frac{d\Phi_m}{dt}\right| }[/math]

We also know that magnetic flux is defined by the formula: [math]\displaystyle{ \Phi_m = \int\! \vec{B} \cdot\vec{n}dA }[/math]

When a metal bar or wire is moving across an area, creating a closed circuit, the magnetic field contained inside the area of the circuit is no longer constant. When there is a non-constant magnetic field, we must use Faraday's law (a combination of the two equations above) to solve for motional emf.


Faraday's Law is defined as: [math]\displaystyle{ emf = \int\! \vec{E} \cdot d\vec{l} = -\frac{d}{dt} \int\! \vec{B} \cdot \vec{n}dA }[/math]

where [math]\displaystyle{ \vec{E} }[/math] is the electric field along the path, [math]\displaystyle{ l }[/math] is the length of the path you're integrating on, [math]\displaystyle{ \vec{B} }[/math] is the magnetic field inside the area enclosed, and [math]\displaystyle{ \vec{n} }[/math] is the unit vector perpendicular to area A.

A Computational Model

In the image shown, a bar of length [math]\displaystyle{ L }[/math] is moving along two other bars from right to left. The blue circles containing "x"s represent a magnetic field directed into the page. As the bar moves to the right, the system encircles a greater amount of magnetic field. For example, the following figure shows a bar moving an a magnetic field at two different times. In the first picture, at time [math]\displaystyle{ t_1 }[/math], the system encircles half of two individual magnetic field circles. However, in the second picture taken at time [math]\displaystyle{ t_2 }[/math], the system now encircles 6 full magnetic field circles. Of course, this explanation isn't using technical terms, but the point still stands: the magnetic field is increasing as time increases.

Because the magnetic field is not constant, we can use Faraday's Law to solve for the motional emf.


As stated above, the formula is as follows: [math]\displaystyle{ emf = -\frac{d}{dt} \int\! \vec{B} \cdot \vec{n}dA }[/math]

First, integrate the integral with respect to the area of the rectangle enclosed.

[math]\displaystyle{ emf = -\frac{d}{dt} (\vec{B} \cdot \vec{n}A) }[/math]

We have the dimensions of the bar in variables: length [math]\displaystyle{ L }[/math] and width [math]\displaystyle{ x }[/math]. Substitute these values for the area, [math]\displaystyle{ A }[/math]

[math]\displaystyle{ emf = -\frac{d}{dt} (\vec{B} \cdot \vec{n}(L)(x)) }[/math]

Now that we have this formula, we have to figure out how to take its derivative with respect to [math]\displaystyle{ t }[/math]. Which of the magnitudes of these values is changing?

The magnitude of the magnetic field is constant. (More "circles" are added as time increases, but the magnitude of each "circles" does not change.
The magnitude of the normal vector is constant.
The length, [math]\displaystyle{ L }[/math], of the bar is constant.
The width of the surface enclosed, [math]\displaystyle{ x }[/math], changes.


How do we visualize or predict using this topic. Consider embedding some vpython code here Teach hands-on with GlowScript

Examples

Be sure to show all steps in your solution and include diagrams whenever possible

Simple

Middling

Difficult

Connectedness

  1. How is this topic connected to something that you are interested in?
  2. How is it connected to your major?
  3. Is there an interesting industrial application?

History

Put this idea in historical context. Give the reader the Who, What, When, Where, and Why.

See also

Are there related topics or categories in this wiki resource for the curious reader to explore? How does this topic fit into that context?

Further reading

Books, Articles or other print media on this topic

External links

Internet resources on this topic

References

This section contains the the references you used while writing this page