Parallel Circuits

The Main Idea

Parallel Circuit is a circuit that is connected in parallel. All components in parallel circuit are linked to the same set of electric points, and they can create several branches(individual paths) within a circuit. These individual paths provide multiple pathways to the charge, so whenever the charge encounters a branch it would travel to the lower potential. This means adding an additional resistor in a parallel circuit would result in a decreased resistance. In a parallel circuit, the potential difference is identical with each resistor positioned in different branches. If a single parallel circuit is opened(broke), no charge would flow to that path, but other paths will have charges going through them.

In order to understand the parallel circuit, it's critical to know the main difference between series circuit and parallel circuits. In a series circuit the current is identical through out the circuit, whereas parallel circuit has current depending on the resistor running through the individual branch. Moreover, in a series circuit the voltage differs,whereas in parallel circuit the voltage is same everywhere.

A Mathematical Model

[math]\displaystyle{ V=IR }[/math]

Using the basic Ohm's law we could determine the voltage, resistance, and current throughout a circuit.

[math]\displaystyle{ \frac{1}{R}_{Total}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}+...\frac{1}{R_N} }[/math]

When calculating the total Reisistance in a parallel circuit, we need to know the basic principle:

More resistor in parallel circuit, less resistance. So, we need to find the sum of reciprocals of individual resistors to derive the total resistor.

[math]\displaystyle{ V_{Total}=V_1=V_2=V_3...=V_N }[/math]

In a parallel circuit, potential difference through out the circuit is equal everywhere.

[math]\displaystyle{ I_{Total}=I_1+I_2+I_3+...I_N }[/math]

In a parallel circuit, the total amount of current outside the individual branch equals to the sum of individual branches in the circuit. Thus, the individual current in each branch depends on the resistor in the branch.

[math]\displaystyle{ I_n=I_{Total}\frac{R_{Total}}{R_n} }[/math]

Current Divider Law Since the current running through each branch of the circuit is dependent on the impedance of that branch, the current divider law can be used to determine the magnitude the current through each individual branch.

So if we want to find out the current in [math]\displaystyle{ R_1 }[/math]

[math]\displaystyle{ I_1=I_{Total}\frac{R_{Total}}{R_1} }[/math]

A Computational Model

This is a simple way to represent a Parallel Circuit. The schematic version is very useful when we want to compute the values, and understand the concept. [math]\displaystyle{ R }[/math] represents a resistor and the [math]\displaystyle{ Battery }[/math] represents the total [math]\displaystyle{ emf }[/math] in the circuit.

This diagram is the actual Parallel Circuit we could see in real life. The actual battery could represent the total emf in the previous schematic sketch, and the light bulb would act as a resistor from the previous parallel circuit.

Examples

These are practical examples we could solve through the formula, and the concept we've learned through this Wiki Page.

Simple

Calculate the total resistance of this parallel circuit.

Solution

[math]\displaystyle{ \frac{1}{R}_{Total}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3} }[/math]

Using this formula we could derive the total resistance of a parallel circuit.

Plugging in 90 for [math]\displaystyle{ R_1 }[/math], 45 for [math]\displaystyle{ R_2 }[/math], and 180 for [math]\displaystyle{ R_3 }[/math], we get

[math]\displaystyle{ {R}_{Total}=25.7143 ohm }[/math]

Middling

Calculate the current running through [math]\displaystyle{ R_1 }[/math].

Total current running through the circuit is 5 ampere. [math]\displaystyle{ R_1 }[/math]= 4 ohm, and [math]\displaystyle{ R_2 }[/math]= 6 ohm

Solution

In order to find out the current running through [math]\displaystyle{ R_1 }[/math], we can use the current divider law. First calculate the total resistance.

[math]\displaystyle{ \frac{1}{R}_{Total}=\frac{1}{R_1}+\frac{1}{R_2} }[/math]

Rearranging this formula we get

[math]\displaystyle{ {R}_{Total}=\frac{R_1R_2}{R_1+R_2}=2.4 ohm }[/math]

Now plug in all the value to the following equation.

[math]\displaystyle{ I_{Total}=5A }[/math]

[math]\displaystyle{ I_1=I_{Total}\frac{R_{Total}}{R_1}=3A }[/math]

Difficult

Calculate the current running through [math]\displaystyle{ R_2 }[/math].

Solution

First we have to find out the total resistance of this circuit. Since we have both series and parallel component in the circuit, we have to add all the components to find out the total resistance.

[math]\displaystyle{ R_{Parallel}=\frac{R_2R_3}{R_2+R_3}=18.75 ohm }[/math]

[math]\displaystyle{ R_{Total}=R_1+R_{Parallel}+R_4=58.75 ohm }[/math]

Now using the Ohm's law we could determine the total current running through the circuit.

[math]\displaystyle{ V_{Total}=I_{Total}R_{Total} }[/math]

[math]\displaystyle{ V_{Total}=10V }[/math]

[math]\displaystyle{ I_{Total}=\frac{V_{Total}}{R_{Total}} }[/math]

[math]\displaystyle{ I_{Total}=0.17A }[/math]

We can now use the current divider law to calculate the current running through [math]\displaystyle{ R_2 }[/math].

[math]\displaystyle{ I_2=I_{Total}\frac{R_{Parallel}}{R_2}=0.10625A }[/math]

To check our answer, calculate the current running through [math]\displaystyle{ R_3 }[/math]

[math]\displaystyle{ I_3=I_{Total}\frac{R_{Parallel}}{R_3}=0.06375A }[/math]

[math]\displaystyle{ I_{Total}=I_2+I_3=0.17A }[/math]

Since the total current in a parallel circuit equals to the sum of the current running through each branch, we could verify our answers.

Connectedness

Circuit, including parallel, series, RC, RL... , could be applied to many areas. Circuits are used for many the power sources in the world. In every day's life we encounter using electrical events from turning on lights, using a mp3 player, and so on. Majoring in computer engineering, I have to deal with many circuits, and apply it to the real world. I choose this topic to cover more details about the circuit, and since a lot of students had hard time solving the circuit problem in Test 3. I'm interested in this area, because I can really understand what I can't easily visualize it in real life. By studying circuit, I can understand how power or electricity works, and even computer! In detail, I'm interested in the application of a simple circuit to design a computer. How integrated circuits are used to build a hardware and software.

http://scienceofeverydaylife.discoveryeducation.com/views/other.cfm?guidAssetId=D1507F6E-09C3-4E7B-B1E9-16708E402009

This website provides some very useful video that shows how simple circuits works in the real world.

History

Integrated Circuit was invented by two inventors name Jack Kilby, and Robert Noyce in the mid 1950s. The work was not done in a corporation. They just came up with the same idea in the same time. Jack Kilby was working for Texas Instrument, whereas Robery Noyce was an research engineer who founded for Semiconductor Corporation. To design a complex computer machine, they needed something more small with more data, and information compared to original transistors, resistors, and capacitors. So they designed an integrated circuit that has many functions within a single chip. It was used to deal with complex matters with minimum cost. From the start of 1960s, many company started to use a chip, replacing the original transistors, and resistors. This integrated circuit is known as one of the most important invention in human kind. I wanted to introduce this specific circuit, because this is what I'm really interested in in my area computer engineering. (Designing the core of the computer)

See also

You could refer to other topics where you can build more idea about the circuits.

Series Circuit

First, you should know clearly about the series circuit in order to understand the basic circuit design. In real life we could see a parallel circuit combined with the series circuit, as the example shown in before.

RC

When we thoroughly understand the general idea of a circuit, it's very useful to refer to more complicated circuit as RC cirucit.

Node Rule

Loop Rule

Power in a circuit

Current

Ohm's Law

These pages would provide some basic information that we could refer to help understand the concept of parallel circuit

Further reading

Introduction to Electric Circuits 9th edition James A. Svoboda Richard C. Dorf Basic Electric Circuit Theory Issaak D. Mayegoyz W.Lawson Matter & Interactions Vol. II: Electric and Magnetic Interactions, 4th Edition R. Chabay B Sherwood

External links

• Parallel Resistor
• Basics
• Invention of Integrated Circuit
• History of Circuit

• All about parallel and series circuit

References

This section contains the the references you used while writing this page