Lorentz Force
Claimed by Chris Mickas 11/15/16
The Main Idea
Electric and magnetic forces can be combined into a single force called the "Lorentz force." This combination of the two forces is useful in applications where a magnetic field and electric field act on a specific particle or series of particles. Common variations of the Lorentz force formula can be applied to various scenarios where a moving particle is subject to both a magnetic and electric field. For example, the Lorentz force can be used to describe the magnetic force on a current-carrying wire and the electromotive force (emf) in a wire loop moving through a magnetic field.
A Mathematical Model
[math]\displaystyle{ \vec{F}_{Lorentz} = q\vec{E} + q\vec{v} ⨯ \vec{B} }[/math] where [math]\displaystyle{ q\vec{E} }[/math] is the electric force and [math]\displaystyle{ q\vec{v} ⨯ \vec{B} }[/math] is the magnetic force.
A Computational Model
Examples
Simple
If the electric force points in the +x direction and the magnetic force points in the –x direction, what direction does the Lorentz force point in?
Solution: The Lorentz force is 0 N.
Middling
The electric force on a certain particle is <500,-200,300> N and the magnetic force is <-200,700,400> N. Find the Lorentz force.
Solution: Lorentz force = <300,500,700> N
Difficult
The speed of the proton is 5e3 m/s. The magnitude of the electric field on the proton is 8e-6 N/C and the magnitude of the magnetic field at that same proton is 4e-9 T. Find the Lorentz force on this proton.
Solution: Lorentz force = 4.48e-24 N
Connectedness
- I am interested in hovering spacecrafts and the Lorentz force can be useful for this topic. Assuming that the Earth's magnetic field is a dipole that rotates with the Earth, a dynamical model that characterizes the relative motion of Lorentz spacecraft is derived to analyze the required open-loop control acceleration for hovering. What must be understood first is the hovering configurations that could achieve hovering without a propellor and the corresponding required specific charge of a Lorentz spacecraft.
2. As an aerospace engineering major, I can investigate the feasibility of using the induced Lorentz force as an auxiliary means of propulsion for spacecraft hovering. To achieve hovering, a spacecraft thrusts continuously to induce an equilibrium state at a desired position. Due to the constraints on the quantity of propellant onboard, long-time hovering around low-Earth orbits (LEO) is hardly achievable using traditional chemical propulsion. The Lorentz force, acting on an electrostatically charged spacecraft as it moves through a planetary magnetic field, provides a new method for orbital maneuvers without propellant.
3. In the metallurgic industry the in-situ measurement of the flow rate of metal melts is still an unsolved problem. Due to the chemical aggressiveness of high-temperature melts, classical measurement techniques such as fly-wheel, Pitot tube, and hotwire probes cannot be used as these methods require mechanical contact with the melt. This is where the calibration of a non-contact electromagnetic flow rate measurement device called Lorentz force flow meter (LFF) comes in handy. To use this Lorentz force flow meter in industrial applications with a determined accuracy, a proper calibration of the flow meter has to be performed beforehand. To this aim, a two-step calibration method consisting of a dry and a wet technique must be performed.
4. The railgun, a 21st-century weapon, uses the Lorentz force to propel an electrically conductive projectile. A magnetic field is generated in the rails and armature by the current flowing through the rails. Consequently, (with an exerted force) the armature is pushed out of the magnetic field of the rails, accelerating the projectile. Railguns and other electromagnetic weapons are crucial to the United States Armed Forces because they have the potential to replace conventional artillery in the near future.
History
Early attempts to quantitatively describe the electromagnetic force were made in the mid-18th century. It was proposed that the force on magnetic poles, by Johann Tobias Mayer and others in 1760, and electrically charged objects, by Henry Cavendish in 1762, obeyed an inverse-square law. However, in both cases the experimental proof was neither complete nor conclusive. It was not until 1784 when Charles de Coulomb, using a torsion balance, was able to definitively show through experiment that this was true. Soon after the discovery in 1820 by Hans Christian Ørsted that a magnetic needle is acted on by a voltaic current, Andre Marie Ampere that same year was able to devise through experimentation the formula for the angular dependence of the force between two current elements. In all these descriptions, the force was always given in terms of the properties of the objects involved and the distances between them rather than in terms of electric and magnetic fields.
The modern concept of electric and magnetic fields first arose in the theories of Michael Faraday, particularly his idea of lines of force, later to be given full mathematical description by William Thomson (Lord Kelvin) and James Maxwell. From a modern perspective it is possible to identify in Maxwell's 1865 formulation of his field equations a form of the Lorentz force equation in relation to electric currents, however, in the time of Maxwell it was not evident how his equations related to the forces on moving charged objects. J.J. Thomson was the first to attempt to derive from Maxwell's field equations the electromagnetic forces on a moving charged object in terms of the object's properties and external fields. Interested in determining the electromagnetic behavior of the charged particles in cathode rays, Thomson published a paper in 1881 wherein he gave the force on the particles due to an external magnetic field as [math]\displaystyle{ \vec{F} = q\vec{E} + \frac{q}{2}\vec{v} ⨯ \vec{B} }[/math].
Although some historians suggest that the Lorentz force originated in the works of Maxwell, the first derivation is generally attributed to Oliver Heaviside in 1889. The Lorentz force's namesake is attributed to Hendrik Lorentz, who derived it a few years after Heaviside.
See also
The Hall Effect explores this concept more in depth because it deals with the electric force and magnetic force being equal given (zero net force). Usually, these problems require you to set them equal to each other and solve for [math]\displaystyle{ \vec{B} }[/math], [math]\displaystyle{ \vec{v} }[/math], or [math]\displaystyle{ \vec{E} }[/math].
If you wish to further explore how electricity and magnetism interact via the Lorentz force, watch this video that provides interesting real-life examples!
Further reading
- http://hyperphysics.phy-astr.gsu.edu/HBASE/hframe.html
- http://www.ittc.ku.edu/~jstiles/220/handouts/section%203_6%20The%20Lorentz%20Force%20Law%20package.pdf
External links
- http://jnaudin.free.fr/lifters/lorentz/
- https://nationalmaglab.org/education/magnet-academy/watch-play/interactive/lorentz-force
References
- Feynman, Richard Phillips; Leighton, Robert B.; Sands, Matthew L. (2006). The Feynman lectures on physics (3 vol.). Pearson / Addison-Wesley. ISBN 0-8053-9047-2.: volume 2.
- Jackson, John David (1999). Classical electrodynamics (3rd ed.). New York, [NY.]: Wiley. ISBN 0-471-30932-X.
- Serway, Raymond A.; Jewett, John W., Jr. (2004). Physics for scientists and engineers, with modern physics. Belmont, [CA.]: Thomson Brooks/Cole. ISBN 0-534-40846-X.