Work Done By A Nonconstant Force
Claimed by Noemi Nath Fall 2017
This page explains work done by non-constant forces. In addition, it provides three levels of difficulty worked examples and analytical models will help readers develop a more thorough understanding.
Let's get started by first understanding what work is! Below is a fun cartoon explaining work! Work Cartoon
The Main Idea
Before you can understand work done by a nonconstant force, you have to understand work done by a constant force.
For a better understanding of what a force is reference this video: [What is Force?]
Work done by a Constant Force
Work done by a constant force i dependent on the amount of newtons executed on the object and the distance traveled by the object. Above is an image depicting the formula W = F*d, where F is the force and d (or X) is the distance travelled. The formula W=F*d only holds true when a constant force is applied to the system.
While this formula is useful. It is not realistic to assume force will be constant in every system.
Work done by a Nonconstant Force
Work done by a nonconstant force is more commonly seen in every day life than work done by a constant force. You can tell if a force is nonconstant if the object moves a distance with a changing force at points along the path. Two examples of nonconstant forces are spring forces and gravitational forces. You can tell that a gravitational force is a nonconstant force by choosing a point on the path. For example, if you choose a point to calculate force on the Moon's orbit around Earth then the Moon will go away from the Earth rather than orbit around it. Another example of a nonconstant force is a spring. If a spring had a constant force, the spring would forever stretch or compress rather than oscillate.
To calculate a nonconstant force you must use a different formula than W=F*d. An integral is needed to calculate the work done along a path of nonconstant force.
Mathematical Model
The total amount of work done on a system is equal to the sum of the work done by all individual forces, therefore, the total amount of work done can be calculated by the summation of each force multiplied by the force Iterative calculations are used in order to calculate non-constant forces and predict an object's motion. Given initial and final states of a system under non-constant force, small displacement intervals should be used to calculate the object's trajectory.
Below is the formula used to calculate each iteration then add them together to calculate total work.
[math]\displaystyle{ {{W}_{total} = {W}_{1} + {W}_{2} + {W}_{3} + ... + {W}_{n} = \overrightarrow{F}_{1}\bullet\overrightarrow{dr}_{1} + \overrightarrow{F}_{2}\bullet\overrightarrow{dr}_{2} + \overrightarrow{F}_{3}\bullet\overrightarrow{dr}_{3} + ... + \overrightarrow{F}_{n}\bullet\overrightarrow{dr}_{n}} }[/math]
[math]\displaystyle{ {{W}_{total} = \sum\overrightarrow{F}\bullet\Delta\overrightarrow{r}} }[/math]
This method, while possible, can get tedious and repetitive. If you make the intervals you calculate indefinitely small, it is the same as integrating. The most common formula used for work with a nonconstant force is the integral from the first point of a path to the last point.
[math]\displaystyle{ {{W}_{total} = \int\limits_{i}^{f}\overrightarrow{F}\bullet\overrightarrow{dr}} }[/math]
Here is a graphical example of the integral.
Computational Model
[<https://trinket.io/glowscript/49f7c0f35f> Model of an Oscilating Spring]
This model shows both the total work and the work done by a spring on a ball attached to a vertical spring. The work done by the spring oscillates because the work is negative when the ball is moving away from the resting state and is positive when the ball moves towards it.
Because gravity causes the ball’s minimum position to be further from the spring’s resting length than its maximum position could be, the work is more negative when the ball approaches its minimum height.
The code works by using small time steps of 0.01 seconds and finding the work done in each time step. Work is the summation of all of the work done in each time step, so another step makes sure the value for work is cumulative.
Modeling Non-Constant Forces in VPython
As shown in this trinket model, Planer Motion of a Spring-Mass System, computational models can also be used in predicting non-constant forces in multiple directions.
#intialize conditions
#calculation loop
#calculate/update force at every time step
L = ball.pos - spring.pos
Lhat = norm(L)
s = mag(L) - L0
Fspring = -(ks * s) * Lhat
#apply momentum principle
ball.p = ball.p + (Fspring + Fgravity) * deltat
#update positions
#update time
Examples
Simple
Situation
A box is pushed to the East 10 meters by a force of 40 N, then it is pushed to the north 8 meters by a force of 60 N. Calculate the total work done on the box.
Diagram
Solution
[math]\displaystyle{ W = \sum\overrightarrow{F}\bullet\Delta\overrightarrow{r} }[/math]
[math]\displaystyle{ W = 40N \bullet\ 10m + 60N \bullet\ 8m }[/math]
[math]\displaystyle{ W = 40N \bullet\ 10m + 60N \bullet\ 8m }[/math]
[math]\displaystyle{ W = 880 J }[/math]
Middling
Background We know that the formula for force is [math]\displaystyle{ F=ks }[/math], where [math]\displaystyle{ s }[/math] is the distance the spring is stretched. If we integrate this with respect to [math]\displaystyle{ s }[/math], we find that [math]\displaystyle{ W=.5ks^2 }[/math] is the formula for work.
[math]\displaystyle{ W=\int\limits_{i}^{f}\overrightarrow{k}\bullet\overrightarrow{ds} = .5ks^2 }[/math]
Situation
Say that we want to find the work done by a horizontal spring with spring constant k=70 N/m as it moves an object 10 cm.
Diagram
Solution
Using the formula W=.5ks2 that we derived from F=ks, we can calculate that the work done by the spring is 0.35 J.
[math]\displaystyle{ W=\int\limits_{0}^{10}70\bullet\overrightarrow{ds}=.5ks^2=.5(70)(0.10^2)=0.35 J }[/math]
Difficult
Situation
The earth does work on an asteroid approaching from an initial distance d. How much work is done on the asteroid by gravity before it hits the earth’s surface?
Diagram
Solution
First, we must recall the formula for gravitational force.
Because [math]\displaystyle{ G }[/math], [math]\displaystyle{ M }[/math], and [math]\displaystyle{ m }[/math] are constants, we can remove them from the integral. We also know that the integral of [math]\displaystyle{ -1\over r^2 }[/math] is [math]\displaystyle{ 1\over r }[/math]. We then must calculate the integral of [math]\displaystyle{ –GMm\over d^2 }[/math] from the initial radius of the asteroid, [math]\displaystyle{ R }[/math], to the radius of the earth, [math]\displaystyle{ r }[/math].
[math]\displaystyle{ W=-GMm\bullet\int\limits_{R}^{r}{-1\over d^2}\bullet dr }[/math]
[math]\displaystyle{ W=-GMm\bullet({1\over r}-{1\over R}) }[/math]
Our answer will be positive because the forces done by the earth on the asteroid and the direction of the asteroid's displacement are the same.
The sector of physics that interests me the most is when I can see what I am computing. This unit covers spring forces. I can understand how the force is not constant because I can see the spring oscillating and changing positions and the amount of force.
Work done by a Nonconstant force is related to my major, Industrial Engineering, because my major focuses heavily optimization. Understanding how nonconstant forces work will help with machines in the workplace to help optimize efficiency.
On an industrial level, the work needed to fill empty tanks depends on the weight of the liquid, which varies as the tanks fill and empty. Energy conversion in hydroelectric dams depends on the work done by water against turbines, which depends on the flow of water. Windmills work in the same way.
History
Gaspard-Gustave de Coriolis, famous for discoveries such as the Coriolis effect, is credited with naming the term “work” to define force applied over a distance. Later physicists combined this concept with Newtonian calculus to find work for non-constant forces.
See also
Further Reading
Book:
Matter and Interactions - 4e Chabay and Sherwood
Article:
Iterative Prediction of Spring-Mass System
External Links
[Work done by Non Constant Force]
References
Created by Justin Vuong
Edited by Chris Mickas
Edited by Yunqing Jia