Bar Magnet
A bar magnet creates a magnetic field, just like many other devices (i.e. a current carrying wire), however, it has a different pattern of magnetic field which we will explore.
The Main Idea
The main idea for this topic is to explore how a bar magnet works and the effects that it has on its surroundings.
A Mathematical Model
Due to the fact that an observation location can either be on the axis of the magnet, or off the axis of the magnet, we have to different equations. For an observation location that is on the same axis as the magnet, assuming that the distance from the observation location to the magnet is much greater than the the separation distance of the two poles we find that: [math]\displaystyle{ B = \frac{\mu _{0}}{4\pi }\cdot \frac{2\mu }{r^{3}} }[/math]
If the observation location is not on the axis of the bar magnet, and assuming that the distance from the observation location to the magnet is much greater than the the separation distance of the two poles we conclude that: [math]\displaystyle{ B = \frac{\mu _{0}}{4\pi }\cdot \frac{\mu }{r^{3}} }[/math]
A Computational Model
As you can see in this picture, the magnetic field of a bar magnet takes the exact same form as an electric field of a dipole. The magnetic lines flow out of the north pole to the magnet, and into the south pole of the magnet, in a curling fashion. However, the 'poles' are merely just conventions. They do not represent anything, and are terms just assigned to each end, but it is true that the magnetic field will always flow out of the 'north end'. Like a bar magnet, the Earth itself can also be represented by the computational model of a bar magnet, however, there are a few misconceptions about this. For starters, the magnetic North Pole is actually located at the geographic South Pole, and the magnetic South Pole is located at the geographic North Pole. Furthermore, the magnetic poles are off axis, meaning the are not directly at the top and bottom of the Earth. There is a difference of almost 1.5 degrees! It is also interesting to note that just because this illustration depicts the bar magnet as having two distinct ends, if you were to cut the magnet down the middle, you would assume that you would end up with a south end and a north end. However, this is not the case. If a magnet were to be cut in half, it would polarize in such a way that you would end up with two bar magnets, not a single south pole and a single north pole.
Examples
Example 1: If a bar magnet is located at the origin aligned with its North end aligned with the positive X-axis, what are the directions of the magnetic field at the following observation locations: above, below, to the left, to the right, and in a plane that is above the magnet?
Well, we already know that the field of a bar magnet flows out of the north end and into the south end in a curling fashion. So, using the diagram above, it is easy to see that to the right of the magnet, the direction of the magnetic field points in the +X direction. At a position to the left of the magnet, the field is flowing back into the south end of the magnet, so the direction of the magnetic field at this location is ALSO in the +X direction.
The field above and below the magnet is flowing from the right to the left at both locations, so the direction of the magnetic field above and below the magnet is in the -X direction.
At a different plane (z doesn't = 0), there is no magnetic field, because we can assume that bar magnet acts as a 2-D dipole.
Example 2: A bar magnet with magnetic dipole moment 0.58 lies on the negative x axis, as shown in the figure below. A compass is located at the origin. Magnetic north is in the negative z direction. Between the bar magnet and the compass is a coil of wire of radius 3.5 cm, connected to batteries not shown. The distance from the center of the coil to the center of the compass is 9.6 cm. The distance from the center of the bar magnet to the center of the compass is 23.0 cm. A steady current of 0.96 A runs through the coil. Conventional current runs clockwise in the coil when viewed from the location of the compass. Despite the presence of the magnet and coil the compass still points north.
(a) Which end of the bar magnet is closest to the compass? (b) How many turns of wire are in the coil?
Part A: Because the conventional current runs clockwise in the coil, you can use right hand rule to determine what direction the magnetic field is due to the coil. This tells us that the magnetic field due to the coil is in the -X direction. In order for the compass to stay still, the magnet needs to directly oppose the magnetic field of the coil, meaning its magnetic field has to point in the +X direction, meaning the NORTH end would have to be nearest the compass (because the field flows out of the north end into the positive end).
Part B: Because the field created by the coil equals the field created by the magnet, we can set their two fields equal to each other: [math]\displaystyle{ \frac{\mu _{0}}{4 \pi } \cdot \frac{2\mu }{r^{3}} = \frac{\mu _{0}}{4 \pi } \cdot \frac{2NI\pi R^{2}}{(z^{2}+R^{2})^{3/2}} }[/math]
Rearranging to solve this equation for N, we get: [math]\displaystyle{ N = \frac{\mu (z^{2}+R^{2})^{3/2}}{I\pi R^{2} d^{3}} }[/math]
Plugging in .58 the magnetic dipole moment (mu), .096 meters for z, .035 meters for R, .96 Amps for I, and .23 meters for d, we get that the number of loops in the coil is 14.
Connectedness
One very interesting applications of magnets is their ability to levitate objects. This is the main driving force in the case of MAGLEV trains. Magnetic levitation, or MAGLEV trains, hover above a long series of magnets where the magnets on the bottom of the train repel the magnets on the tracks below it. Sending an electric current through the coils on the bottom of the track allows the train to levitate a few inches off the ground, and propelling the current through the guided coils on the bottom of the track propels the train forward at unbelievable speeds (up to 250 MPH!).
Making the train levitate is a useful tool because it reduces the amount of friction between the wheels and the track, and it allows for less fossil fuels to be used in order to make the train propel forwards.
History
The first magnets were not invented, but rather discovered. The ancient Greeks and ancient Chinese peoples stumbled upon a naturally occurring material, called magnetite, by mistake. People were so astounded by it that tales were told of magical islands where magnetic nature was everywhere. The Chinese actually developed a compass around 4500 years using this magnetite!
Despite not being the first people to study magnetism, Hans Christian Oersted did prove that electricity and magnetism were related by bringing a current carrying wire close to a compass needle. However, it wasn't until Maxwell published his findings in 1862 that led to the relationships between electricity and magnetism (Maxwell's Equations; see other Wikipedia page).
External links
- MAGLEV Trains: http://www.scienceclarified.com/everyday/Real-Life-Physics-Vol-3-Biology-Vol-1/Magnetism-Real-life-applications.html
- More information on Bar Magnets: http://hyperphysics.phy-astr.gsu.edu/hbase/magnetic/elemag.html
References
http://hyperphysics.phy-astr.gsu.edu/hbase/magnetic/elemag.html https://en.wikipedia.org/wiki/Magnet#/media/File:VFPt_cylindrical_magnet_thumb.svg
Category: Fields
Created by: John Joyce