Malleability

This page covers one of the intensive properties of matter: Malleability

Claimed by Marguerite Murrell (Fall 2016)

The Main Idea

A Property of Matter

Properties of matter can be broken down into two distinct categories: physical and chemical. The physical category can also be broken down in a similar manner, consisting of intensive and extensive properties. A physical property is one that can be determined without changing the identity of the substance, and intensive properties can be determined regardless of the amount of matter of the substance present. Malleability is classified as a property of matter, along with ductility and conductivity.

What is Malleability?

Malleability is one such intensive property of matter. Malleability is the ability for something, generally metals, to be molded or deformed into another shape. Often considered to simply be the ability for a metal to be hammered into thin sheets, malleability is actually a material's ability to deform under pressure of a force pushing on it, in other words, a compressive force. Malleability certainly also has a close relationship with an object's hardness, which is defined as a material's resistance to being indented. Harder objects are considered less malleable. Knowing this aids in measuring malleability, as detailed below.

How Does it Work?

Malleability in metals is due to metallic bonds which are characterized by a mobile "electron sea". The electrons are able to move around and allow the metal atoms to adjust back and forth, past other atoms if a force is applied to them. The atoms in a metal are packed tightly, fitting as many as possible in the metal's respective space/volume, creating layers of atoms side by side, sometimes aligning. Areas where atoms align are called "crystal grains".

A metal is more likely to break at the grain boundaries (the point where crystal grains meet), so metals with a higher grain boundary count and larger grain boundaries is considered less malleable. The actual deformation of a metal occurs when pressure/stress are put on the object, causing the atoms to roll over one another and permanently settle in a different place.

The amount the atoms move is dependent upon two key factors: the temperature and the strength of the metallic bonds. Having weak metallic bonds means that there is less energy required to move the relative positions of the atoms and therefore means the material will have a higher malleability. Likewise, a metal or alloy with a stronger metallic bond needs more energy to change its atom's alignment. Temperature affects the malleability of a material by regulating the crystalline structure of the atoms. In most metals, the heat makes the structure of the atoms more regular which softens the metal and makes it more malleable.

Malleability and Ductility

It is important to keep in mind that malleability is not the same as ductility. These two physical properties of metals, although similar, have a few distinct differences. Ductility is the ability of a material to stretch under tensile stress, a force acting away from the object. Malleability, on the other hand, is a metal's ability to deform under compressive stress, a force acting towards the center of the object. The key difference here, is tensile versus compressive stress. Some exceptional materials, such as copper, have both good ductility and good malleability.

Measuring Malleability

Malleability is not typically or easily measured with quantitative values. We determine a metal's malleability by testing how much stress it can take before breaking, and additionally testing whether a metal can be rolled into a sheet (some metals can be flattened into thinner sheets than others). Both malleability and ductility can be tested at the same time by bending a rod of the material of discussion until it cracks at the place of bend. Cracks on the outside of the rod indicates how ductile the material is, because that area of the material is being stretched as the rod bends. Cracks on the inside of the bend indicate the material's malleability, because that area is being compressed as the rod is bent.

Because there is no definitive method or unit for measuring malleability, oftentimes metals are simply compared to each other to create a scale of malleability, as detailed below.

Since malleability is so closely connected with a metal's hardness, material scientists look to hardness tests, such as the Rockwell Test, to predict a metal's malleability. See the section below on the Rockwell Test for additional information.

Examples

Scale of Malleability

Since there is no universal quantitative way of measuring a material's malleability, it is determined based on comparison to other like materials. View the list below for a scale of malleability among common alloys and metals:

Products and Common Use

While malleability can be considered to some extent with everything you see everyday, one of the most common everyday uses of malleability is with aluminum foil. Whether for a science project or for leftovers from dinner, the ability to crumple up or change the shape of aluminum foil is quite convenient. Pottery and horseshoes are also common examples of malleability put to work.

Additionally, materials with high malleability, such as gold, can be used for dental fillings, creating electronic components for computers and cell phones, jewelry, and decoration. Since gold is the most malleable material in existence and can be flattened into sheets as thin as a few atoms thick, gold leaf is commonly used for decoration of important monuments, statues, government buildings, and royal homes. Examples in history include much of the gold decor in King Louis XIV's Palace of Versailles, as well as the gold leaf dome on the Georgia State Capitol building.

Industrial Applications

The property of malleability is utilized in industrial applications through processes such as forging, drop-stamping, and hot-rolling. These and many other processes allow different metals to be worked and formed into all sorts of useful items. Steel-girder bridges, one of the most common types of modern bridges used, are an interesting application of this property. The steel grid helps support the concrete deck that serves as the walkway or roadway surface. The supporting structure of the bridge consists mainly of the steel holding up the deck. Without malleability, the beams used for these types of bridges wouldn't be able to be forged and stamped, nor would they be able to withstand the compression that the load on the bridge itself causes.

History

Derived from the Medieval Latin word, malleābilis (almost directly meaning "hammer-able"), malleability has been understood and utilized for centuries for a variety of things. Such uses range from the molding of clay for pottery to the forging of swords and armor in Medieval times, and even to the production of steel beams used in the construction of modern bridges. The modern era of chemistry and physics, however, has allowed a more controlled use of this intensive property of matter in industrial applications.