Work and Energy for an Extended System

ATHENA WU Spring23

The Main Idea

Unlike the point particle system where the only energy possible is translational kinetic energy, an extended object can rotate, vibrate, and change shape. Though the point particle system and the extended system both have the same total mass, and are both acted on by the same net force, the point particle system, has no rotational motion, vibrational motion, or internal energy because all of the forces act at the location of the point particle. In contrast, forces act at different locations on the mass in an extended system, thus causing them to rotate, vibrate and stretch. Because of these qualities, not every part of the system always moves in the same direction as the center of mass moves.

When calculating work done on an extended system, the displacement of every point where a force is applied must be considered separately, because it matters where each force is applied.

A Mathematical Model

Work and Energy for an Extended System:

This equation assumes that each force is constant during the displacement. If each force is not constant during the displacement, the work of each force as an integral of [math]\displaystyle{ \vec{F}_{i}•d\vec{r}_{i} }[/math] must be calculated either analytically or numerically.

A Computational Model

A Jumping Kangaroo Modeled as an Extended Object:

If one were to model a jumping kangaroo as a point particle system, the change in translational kinetic energy could be derived. However in the real world, Kangaroos are not a point particle, but rather an extended system where energy changes occur in the legs and arms of the kangaroo relative to the center of mass. Chemical energy and thermal energy are just two more examples of energy changes that may occur in extended systems but not in point particle systems.

The work done on a point particle system is not the same as the work done on an extended system. Because forces are applied in many different locations on the mass in an extended system, sometimes these forces act through different distances than the displacement of the center of mass of the system, for different sections of the system move different distances. The following free-body diagram a modeled extended system illustrates how these individual forces may act at different locations:

When considering all the possible changes in energy when a Kangaroo jumps, the energy equation for the Kangaroo modeled as an extended system (ignoring Q, or the transfer of energy due to a temperature difference between the Kangaroo and the surrounding air), should look like the following equation:

The change in relative kinetic energy and the change in internal energy do not appear in the energy equation for the point particle system because the point particle system only focuses on the translational motion of the center of mass point. The change in relative kinetic energy includes the rotation of the legs and the swinging of the upper body and tail of the Kangaroo. The change in internal energy includes the increase in thermal energy of the Kangaroo's body and the decrease in chemical energy that was previously chemically stored in the Kangaroo's body. This computational model of the jumping Kangaroo allows one to visualize how unlike the point particle system, the extended system changes shape due to the bending of the legs, arms, and torso of the Kangaroo during the jump.

Example

Middling

Solution (a)

System: Point Particle

Surroundings: Hand and Earth

Initial State: Point particle with initial translational kinetic energy

Final State: Point particle with final translational kinetic energy

Energy Principle (keep in mind that point particle systems only have translational kinetic energy!)

Solution (b)

Hard

A system consists of a uniform sphere of mass M and radius R. It is attached to the middle of a massless rod of length L, and two small point masses of 2m are at the end of the rod. This apparatus lies on a frictionless surface.

A string is wound up around the sphere, and you start pulling on the string with constant force of magnitude F, causing the apparatus to slide along the frictionless surface. The string that is pulled at force F moves/comes off a total of distance D. The sphere+rod is spinning at an angular speed of ω.

Use the extended system to find what the angular speed ω is in the final state.

Error creating thumbnail: sh: /usr/bin/convert: No such file or directory Error code: 127

Connectedness

1. How is this topic connected to something that you are interested in?

This topic interests me because it involves calculating work in real systems present in the real world, unlike the point particle system which focuses more on calculating work on single atoms or idealized versions of objects modeled as a point particle. Being able to apply physics to real world situations is always so exciting for me.

2. How is it connected to your major?

I am a biology major. By learning how to calculate the work done on an extended system, for example a Kangaroo jumping, I am able to incorporate and consider chemical energy changes and thermal energy changes in the Kangaroo. Knowledge in how much energy a Kangaroo uses while jumping is just one example of how I am able to use physics to forward my knowledge in the biology field as well.

3. Is there an interesting industrial application?

This is a very interesting industrial application because knowing how to calculate the work done on an extended system such as a rocket, could forward our knowledge in rocket science and what is needed to travel further into space. Once we are able to quantify how much work must be done on a system to travel a certain distance at a safe, controlled speed, we have the potential to maybe one day reach Mars and other planets!

Work and Energy for an Extended System

Contents

The Main Idea

A Mathematical Model

A Computational Model

Example

Middling

Hard

Connectedness

See also

Further reading

External links

References

Navigation menu