Magnetic Force
Authored by TheAstroChemist (This page was claimed first by TheAstroChemist - check the page history)
The Main Idea
We know so far that an electric field will act on a charged particle in a specific manner. In effect, a charged particle in the vicinity of any electric field will undergo a force based upon the magnitude and sign of the charged particle. This electric field is generated regardless of whether the charge is stationary or moving.
In the case of a moving charged particle, it is also known to generate a magnetic field. Whenever any charge maintains some velocity, it will necessarily produce a magnetic field. This applies whether you're dealing with a single point charge or a charge distribution such as a uniformly charged rod or disk.
Now, you might reasonably guess that because an electric field brings about a force on a charged particle, then so too a magnetic field should bring about a force on a particle. However, in order for a magnetic field to implement this force, the particle of interest must be moving. These two forces (electric and magnetic) can be combined to be known as the Lorentz Force, but that will be covered in further detail later. For now, we shall only focus on the specifics of the magnetic force and ignore the effects of an electric field on our system of interest.
A Mathematical Model
Suppose we have a moving particle. It has a charge given by q. It has a velocity given by [math]\displaystyle{ {\vec{v}} }[/math]. It is also in the presence of a magnetic field given by [math]\displaystyle{ {\vec{B}} }[/math]. The force that this particle will experience is given by the following:
(1) [math]\displaystyle{ {\vec{F} = q\vec{v}\times\vec{B}} }[/math]
Therefore, for a particle at rest ([math]\displaystyle{ {\vec{v} = \vec{0}} }[/math]), the particle will experience a force given by [math]\displaystyle{ {\vec{F} = \vec{0}} }[/math].
The SI units involved? Force is in newtons (N), magnetic field is in tesla (T), charge is in coloumbs (C), and velocity is in meters per second (m/s).
Note that the above equation (1) denotes a cross product of the vectors of velocity and magnetic field. Therefore, the force that the moving charged particle will experience is perpendicular to the plane spanned by those two vectors. It could also be written in another way:
(2) [math]\displaystyle{ {\vec{F} = q|\vec{v}||\vec{B}|sin(\theta)} }[/math]
In equation (2), the angle [math]\displaystyle{ {\theta} }[/math] represents the angle spanning the velocity vector and the magnetic field vector at some given position that the particle is at. Thus, if and only if the velocity and the magnetic field vectors are exactly perpendicular, then the force that the particle will experience is simply given by the multiplication of the velocity and magnetic field magnitudes with the charge of the particle of interest. It's important to remember that the true force involved is a vector and thus it needs to be treated appropriately in most, if not all cases you will encounter.
What about the force that a moving charged distribution will experience? This is relevant in the case of something such as a current carrying wire.
Recall... (1) [math]\displaystyle{ {\vec{F} = q\vec{v}\times\vec{B}} }[/math]
Thus, for some section of charge [math]\displaystyle{ {\Delta q} }[/math]... (3) [math]\displaystyle{ {\Delta\vec{F} = \Delta q (\vec{v}\times\vec{B})} }[/math]
... hence, for n charged particles, A cross sectional area, and sectional length [math]\displaystyle{ {\Delta L} }[/math], we have... (4) [math]\displaystyle{ {\Delta\vec{F} = n A \Delta L (\vec{v}\times\vec{B})} }[/math]
... and now, by re-arranging the terms to collectively represent some current I, we have... (5) [math]\displaystyle{ {\Delta\vec{F} = I (\vec{\Delta L}\times\vec{B})} }[/math]
Equation (5) can be readily applied to any given charge distribution, whereby the partial length is in the same direction as current. It can be integrated to find the total force if need be in a manner similar to how you computed this for previous charge distributions!
Recall that a moving charged particle generates a magnetic field [math]\displaystyle{ {\vec{B}} }[/math] given by the following:
[math]\displaystyle{ {\vec{B} = \frac {\mu_0} {4pi} \frac {q\vec{v}\times\hat{r}} {r^2}} }[/math]
A Computational Model
How do we visualize or predict using this topic. Consider embedding some vpython code here Teach hands-on with GlowScript
Examples
Be sure to show all steps in your solution and include diagrams whenever possible
Simple
Middling
Difficult
Connectedness
- How is this topic connected to something that you are interested in?
- How is it connected to your major?
- Is there an interesting industrial application?
History
Put this idea in historical context. Give the reader the Who, What, When, Where, and Why.
See also
Are there related topics or categories in this wiki resource for the curious reader to explore? How does this topic fit into that context?
Further reading
Books, Articles or other print media on this topic
External links
Internet resources on this topic
References
This section contains the the references you used while writing this page