Magnetic Dipole

Claimed by Priya Patel (Spring 2017)

Edited by Charles Heaton (Fall 2017)

Claimed/Edited by Christopher Lindbeck(Fall 2018)

The Main Idea

A dipole is a pair of field producing entities placed close together to produce a particular pattern of field. In such cases it is useful to look a the pair as a single entity as a simplification as it allows us to create simple and commonly applicable equations for them as opposed to considering the two entities as separate. Dipoles also have a number of properties that shape the natural world in unique ways as the interactions of dipoles often create emergent properties.

Physics students are typically taught about electric dipoles first, and will recognize that many of the properties and formulas resemble each other quite closely, This is because dipoles have the same field shape no matter what field they are influencing and so the same relationships between position and intensity exist with respect to the magnitudes of the charges.

A common example of a macroscopic magnetic dipole is a common permanent magnet such as a bar magnet. These magnets will produce a magnetic field everywhere in space and the force varies only with observation position. This is very similar to an electric dipole, but instead of electrical charges, we have magnetic ones, represented by the North and South poles. Just like with positively and negatively charged ions, like charges repel, and opposite charges attract.

Since magnets always have two poles, the magnetic field produced is that of a magnetic dipole. The North pole is analogous to a positive charge and South to a negative charge, in that the field lines flow out from the North pole into the South pole.

Major Distinction from Electrical Dipoles

One major distinction between electrical and magnetic dipoles is the fact that while electrical "monopoles" exist in abundance in electrical charges, a magnetic monopole has never been confirmed to exist. This means that when talking about magnetism, we are essentially always talking in terms of dipoles and the dipole equations are used much more commonly than the formulas for individual magnetic charges. By using the formulas for dipoles, we can figure out the dipole moment of any magnet as long as we know our relative position and then we will have a reasonable model of any magnet that we can measure.

Bar magnets are what we typically think about when talking about dipoles, but there are a couple of other important constructs that create dipole magnetic fields. The other most notable magnetic dipole is the coil of wire with current flowing through it.

Connection With Magnetic Fields in Loops of Wire

One of the most important things to recognize is the similarity between an obvious dipole like a bar magnet and what occurs when current flows through a loop of wire and how that allows us to perform calculations much easier. Current moving in a closed loop will create a dipole magnetic field as shown below.

We can see how this is similar to the field produced by particles(or equivalently by a permanent magnet)

One of the most important things to note about the dipole simplification is that it grants us the ability to calculate dipole moment, a measure of the polarity of the dipole, which aids in calculations regarding the energy and forces involved in iterating with the dipole. This is especially useful for dealing with current in a loop of wire, as it does not resemble a traditional dipole. Once you have the moment you can use all of the nice dipole formulas instead of trying to treat it as coils of wire.

Magnetic Dipole Moment and Connection with Torque on a Coil

The magnetic dipole moment represents the magnitude of the field of the dipole, essentially its magnetic potential.

The most common unit for the dipole moment is Ampere-square meters which is derived from how you calculate the moment of a coil of wire. It can also have the units of Joules per Tesla, representing the amount of energy per unit of magnetism an object will experience in the field of the dipole.

The magnetic dipole moment as it relates to current in coils of wire represents the torque on the current in the wire, which again is proportional to the magnitude of the magnetic field.

A Mathematical Model

The equation for a magnetic dipole moment is:

[math]\displaystyle{ \boldsymbol{\mu} = \boldsymbol{IA} = \boldsymbol{I{\pi}R^2} }[/math] with units [math]\displaystyle{ A*m^2 }[/math]

where I is the current, and A is the cross sectional area. This will be used to calculate the magnitude of the magnetic field produced by a magnetic dipole.

The 2nd part of the equation is specifically for a circular loop field induced magnetic dipole and its area is the area of the loop.

From this equation, we can deduce the magnetic dipole moments just knowing the conventional current flowing through the loop and the radius.

However, most of the time the current is not given. Furthermore, the equation is not applicable for the normal bar magnets, for they do not have a electrical current flowing through. Thus, another way to get the dipole moment is by using the relationship between the magnetic dipole and the magnetic field induced by the dipole.

There are two equations based on the observation location.

Observation Location Perpendicular to Dipole Axis

If the observation location is perpendicular to the axis of the dipole(see below),

then the equation for the magnetic field induced by the dipole is:

Note that this equation is analogous to the equation for an observation location perpendicular to the axis of an electric dipole. This is because magnetic dipoles and electric dipoles both have the same field shape.

Observation Location Along Dipole Axis

If the observation location is placed along the axis like in the image below,

then the equation for the magnetic field induced by the dipole is:

Note that this equation is analogous to the equation for an observation location perpendicular to the axis of an electric dipole. This is again because magnetic dipoles and electric dipoles both have the same field shape.

Direction of Dipole Moment

It is also important to note the direction of the dipole moment. In a bar magnet the dipole moment will be wrapping from the North end of the magnet until it faces the South end of the magnet in a traditional dipole fashion and field pattern.

On the other hand, if you are looking at the dipole moment induced by a current-flowing loop, you have to use the right hand rule. If you point your thumb in the direction of the current along the wire, your fingers will curl in the direction through the loop in the direction the magnetic field is flowing. Alternatively you can think about it another way and curl your fingers in the direction of the current, and your thumb will point in the direction of the magnetic dipole moment induced from the current.

Computational Model

The computational plot of a magnetic dipole is very similar to the plot of an electric dipole because of their similar forces. In some simulations, you can see a loop or coil of wire with the surrounding forces displayed using spaced vectors. In this simulation, you are able to move a dipole around and see in 3D how the dipole affects its surroundings with a constant magnetic field.

Examples

Simple

In a circular loop with current of 3 Ampere and diameter of 16 cm, what is the magnetic dipole moment induced from the current?

Solution

We can just simply use the first equation given in the beginning:

where R is 0.08 meters and I is 3 Amperes. Calculating for the magnetic dipole moment gives:

[math]\displaystyle{ 3 \times 0.08^2 \times \pi = 0.0192 A*M^2 }[/math]

Middling

When a compass is placed 20 cm away from a bar magnet parallel to the x-axis and shows deflection of 20 degrees, what is the magnitude of the magnetic dipole moment? You can assume that |B_earth| is [math]\displaystyle{ 2 \times 10^-5 T }[/math]

Solution

First, we need to figure out the magnetic dipole induced from the magnet. Thus, we need to use the formula:

where |B_earth| is [math]\displaystyle{ 2 \times 10^-5 T }[/math], and the deflection is 20 degrees. Thus,

[math]\displaystyle{ (2E-5 T) * tan(20) = 7.3E-6 T }[/math]

This gives us the magnitude of the magnetic field contributed by the bar magnet. We can plug in the value into the formula given (note that because it is along the x-axis, we use this formula)

[math]\displaystyle{ 7.3E-6 = \frac {1E-7 * 2 * \mu} {(0.2)^3} }[/math]

[math]\displaystyle{ \mu = 0.292 A*M^2 }[/math]

Conceptual Question

If released from rest, what, if anything, will the current loop do?

Solution

The loop will rotate counterclockwise. We know this because the magnetic dipole moment has a tendency to want to align itself with any externally applied magnetic field, if one exists. Using the right-hand rule for a loop of current, we curl our fingers clockwise, causing our thumb to point straight downwards. This means that our magnetic dipole moment is poiting straight downwards. In order to align itself with the magnetic field that is pointing to the right, it must rotate counterclockwise.

Connectedness

Magnetic Flux and Degaussing Coils

As someone in the Navy ROTC Unit and joining the fleet someday, I like to learn about navigation and am currently enrolled in naval navigation. In this class we have looked at many different things about maneuvering but the most interesting was about open ocean navigation and use of the compass(link to section on geographic vs. magnetic north). In the times before gyro compasses and GPS calculations to find true north, sailors had to purely rely on their magnetic compass.

This was especially difficult due to the surrounding magnetic fields being emitted from the plethora of wires and equipment surrounding the compass on the bride and throughout the ship. So, in order to dampen the deviation of the compass created by the many different electric fields, the navy instituted what is called Degaussing Coils and spheres. These coils were strategically lined through the ship and the spheres were positioned directly next to the compass on opposite sides of the compass in order to cancel the surrounding magnetic field. These coils when used properly create a magnetic dipole.

In some robotics applications, like robotic soccer in my case, we use solenoids to rapidly accelerate iron cores to kick soccer balls at high velocities. The precise calculations to figure out how much acceleration the core is under and how the magnetic field affects it are immensely complex and require a lot of compute power and time, but we can use the dipole moment calculation to get a decent idea of how much energy is being imparted and a rough idea of the acceleration we are dealing with in order to figure out how long to energize the coil to get the ball to a specific velocity.

Industrial Application

One of the most common industrial applications of Magnetic Dipole is the Nuclear Magnetic Resonance spectroscopy. To learn more about NMR, click here

Dipole-like fields are found anywhere there is a coil of wire, that is to say in many electronic applications such as electric motors, transformers, chokes, and many other electronic components. The dipole simplification of magnetic field calculations makes it much easier to calculate for these devices although with the prevalence of computer models more accurate calculations can be performed.

History

Magnetic Monopoles

Although electrostatics and magnetics have a lot in common, one difference is that magnetic poles cannot exist singly like charges can. Poles always come in N/S pairs. If you were to cut a bar magnet in half, you will get two new magnets with North and South poles.

A magnetic monopole was observed once, by | Blas Cabrera, on February 14, 1982 (also known as the Valentine's Day Monopole). However, this experiment has been recreated several times, and no one, not even Cabrera himself, has been able to find another monopole.

Magnetic North vs Geographic North

There is a common misconception about the magnetic field of the earth and the geographical north pole. The geographical north pole is home to the magnetic south pole and vise versa. However, the magnetic and geographical poles are not located in the same place on the planet. This means that while a compass is the first thing that comes to mind when people think about navigation, it is not an effective means of navigation when nearing the poles or in the waters of the far north or south. Below in the Further reading section, there is an in depth article about the positioning of the magnetic and geographical poles, how they came to be, and the effect they have had on the world.

See also

Electric Dipole

Magnetic Field of a Long Straight Wire

Magnetic Field of a Loop

Further reading

Terahertz Magnetic Response from Artificial Materials

Navy Degaussing Methods

True North VS Magnetic North

References

More information on NMR

Magnetic Dipole Moment

More information on magnetic monopoles

Attempts at proving the existence of a magnetic monopole